I have BH 3.1.0 and I put Open BH 5 in Open Multiboot Backup. Apparently the IMG wasn't right. An inscription appeared to me as the second IMG "traceback most recent call last". However, this "IMG" cannot be removed and you cannot run BH 3.1.0 from flash. The receiver stopped working. There is no new installation of BH in falsh, there is still the problem that blocks it. I had to install VTI, but I want to go back to BH. Please, give me an advice.
Open Multiboot does not work
- Thread starter guruamba
- Start date
Matrix10
Administrator
Remove the USB stick if you put in the wrong image.
The flash image will be started and raised if it is not damaged.
Format the USB stick and reinstall the images in the multiboot.
If the flash image does not work
Reinstall the flash image according to standard procedures
with USB stick (format FAT32 before installing flash image)
The flash image will be started and raised if it is not damaged.
Format the USB stick and reinstall the images in the multiboot.
If the flash image does not work
Reinstall the flash image according to standard procedures
with USB stick (format FAT32 before installing flash image)
I have an Open multiboot on the HDD. I install a new IMG in a zip file in the upload folder via Total Commander and let it install in the folder. So far, everything has been without problems. The problem occurred only after the installation of Open BH5, which was not right and cannot be uninstalled. He's still in the receiver. Now I have a VTI and I don't know if I will return to the new proper installation of BH3 in the flash receiver, if it will work. I don't know how to clean the receiver.
Matrix10
Administrator
When you install an image in flash
It cleans the flash and installs a new image.
Multiboot images can be deleted from/in Open mutiboot plugin
or manually via FTP .
Of course if you install OpenBh/or BH image in flash and VTI is in flash VTI will be deleted in flash.
If the VTI is in the Multiboot Hard Drive it will not be deleted/erased.
It cleans the flash and installs a new image.
Multiboot images can be deleted from/in Open mutiboot plugin
or manually via FTP .
Of course if you install OpenBh/or BH image in flash and VTI is in flash VTI will be deleted in flash.
If the VTI is in the Multiboot Hard Drive it will not be deleted/erased.
AlexWilMac
Moderator
I don't understand what reason you had to install VTi in flash just because your BH image didn't want to start: couldn't you, instead, reinstalling BH itself, in case?!?
But, above all, as @Matrix10 said, you just needed to delete the image installed in OMB by a FTP client, if the OMB menu didn't work.
Even if your OMB is set in HDD, if you have a problem and the image in OMB does not want to start, you have simply to disconnect your HDD, start your box and wait until the image in flash starts.
Then, this is important, remember to go to OMB menu and set the image in flash as the preferred one for the next boot.
Connect again your HDD and restart.
But, above all, as @Matrix10 said, you just needed to delete the image installed in OMB by a FTP client, if the OMB menu didn't work.
Even if your OMB is set in HDD, if you have a problem and the image in OMB does not want to start, you have simply to disconnect your HDD, start your box and wait until the image in flash starts.
Then, this is important, remember to go to OMB menu and set the image in flash as the preferred one for the next boot.
Connect again your HDD and restart.
Thomas67
Vip
Also i usualy start all my new images by installing them into OMB. Now in this case when you get this message nothing is wrong, Just the diffrent python version making this error show.
You can still do a full reboot and from the startup OMB menu choose the OBH5 image and it will have to correct name.
You can still do a full reboot and from the startup OMB menu choose the OBH5 image and it will have to correct name.
I have VU + UNO4KSE in flash I have Black Hole 3.1.0 and I want to install Open Black Hole 5 in open multiboot. When I want to install OBH5, the text "traceback last call as last" will appear instead of this name. If I still want to install, another warning will appear, which I cannot list here for its content. Is it dangerous to install such an img ?? I don't want to damage VU + -
I have VU + UNO4KSE in flash I have Black Hole 3.1.0 and I want to install Open Black Hole 5 in open multiboot. When I want to install OBH5, the text "traceback last call as last" will appear instead of this name. If I still want to install, another warning will appear, which I cannot list here for its content. Is it dangerous to install such an img ?? I don't want to damage VU + -
AlexWilMac
Moderator
No, it's not. Try to shorten the zip file you put in the upload folder: for instance, name it just OBH.zip
But, if I were you, I 'd do the opposite: put OBH in flash and "try" BH in OMB. After all, thanks to VU+, BH is being abandoned. And, in my humble opinion, there's no match between them two. OBH means freedom.
But, if I were you, I 'd do the opposite: put OBH in flash and "try" BH in OMB. After all, thanks to VU+, BH is being abandoned. And, in my humble opinion, there's no match between them two. OBH means freedom.
have VU + UNO4KSE. I bought a tuner for terrestrial television T2 and in Black Hole I have it as tuner I. In img Open Black Hole5 this tuner is not visible and I don't know how to put it into operation. There are only tuners A, B, C, D, E, F, G, H,
AlexWilMac
Moderator
BH has no option to install drivers needed for HW: it has got or it hasn't.
OBH have the chance of installing only the driver you need: they are among Addons (Green panel), OpenBh Feeds, Drivers
OBH have the chance of installing only the driver you need: they are among Addons (Green panel), OpenBh Feeds, Drivers
I'm sorry, but I didn't find any OpenBHfeeds drivers in the OpenBH plugins. I think I have to adjust the SETTINGS somewhere so that the engine spins on the selected satellite.
AlexWilMac
Moderator
I have got in my reciever VU + USB Turbo tuner - external DVB-T / T2 tuner from Marusys.
This tuner was supplied to me by my original VU + UNO4K SE dealer and it works perfectly in img Black Hole. It is not possible to tune in to T2 terrestrial television only in img Open Black Hole.
Now I have installed Oplen Black Hole 5 in the flash and I thought the problem with rotating the dish would be solved. It disappointed me. Again, it is not possible to turn, for example, from 23 E to 19 E, etc. I can't deal with that.
AlexWilMac
Moderator
Again: BH is uselessly crowded with drivers, and users have to use an image full of drivers useless to them! OBH simply let you install only what you need.
Did you follow the path I wrote? There you have also this driver. I, too, have a VU+Turbo tuner (but be sure it's the model you said, because there are other two "Turbo", a second version and a SE version...).
GREEN/YELLOW and so on (the path I already told you).
And again you did not answer my question and replied BH made VU+Turbo work while OBH doesn't.
But I had asked you a very precise question: "what you did not find? The driver section or the driver?"
Obviously, is not possible to help you if you provide feedbacks like these.
You created a post named "Open Multiboot does not work" and then you mixed here other issues.
Attachments
I have got motor OPTICUM DM2400.Tuner A ,B Usals - simple . longitude - east , latitude - north,extra engine motions - no, force legacy signal stats - no,
I can't upload a photo here.
Thomas67
Vip
Read the first page of OpenBh forum. There is info about the tuner and what drivers/firmware needed
Install Vu+Turbo tuner.
To get your VU+ turbo tuner to work with openbh image you have to install the right driver.
From software manager install following driver:
- VU+ Turbo:
enigma2-plugin-drivers-dvb-usb-turbo
- VU+ Turbo 2:
enigma2-plugin-drivers-dvb-usb-turbo2
- VU+ Turbo SE:
enigma2-plugin-drivers-dvb-usb-dvbsky-classic
Install Vu+Turbo tuner.
To get your VU+ turbo tuner to work with openbh image you have to install the right driver.
From software manager install following driver:
- VU+ Turbo:
enigma2-plugin-drivers-dvb-usb-turbo
- VU+ Turbo 2:
enigma2-plugin-drivers-dvb-usb-turbo2
- VU+ Turbo SE:
enigma2-plugin-drivers-dvb-usb-dvbsky-classic
