AvarTV Volar Green HD - BlackHole 2.0.1

[rogerpal]

Hello, can anyone please tell me were i can found the ipk to reconize my usb tuner volor green HD with BH 2.0.1 ?
Thanks in advance

 

[angelofsky1980]

Hello, can anyone please tell me were i can found the ipk to reconize my usb tuner volor green HD with BH 2.0.1 ?
Thanks in advance

Your device is already supported. Power off your box, plug your device and turn on again the box.
Look into Tuner Setup if all is detected properly

 

[rogerpal]

Hy AngelofSky, device not appare in the Tuner setup (box is VuDuo)

 

[rogerpal]

In the past with BlackHole 1.7.9 works great. Now i've tryed also with avermedia a 867 (blu led) but same problem. Any help?

 

[rogerpal]

I have found in another thread this patch https://patchwork.kernel.org/patch/1905731/ could be used for my problem? If yes how? Thank you for your help.

 

[angelofsky1980]

I have found in another thread this patch https://patchwork.kernel.org/patch/1905731/ could be used for my problem? If yes how? Thank you for your help.

The patch you mention is already included into DVB USB drivers used into BH images.
Please read this thread how to report details about your device: http://www.vuplus-community.net/board/threads/usb-tuner-howto-report-problems.621/

 

[poquelin]

Hi
I have the same problem with VU+UNO and BlackHole 2.1.0. My AverMedia Volar Green HD (A835) is not recognized.
Someone have a solution?
Thanks

 

[angelofsky1980]

Hi
I have the same problem with VU+UNO and BlackHole 2.1.0. My AverMedia Volar Green HD (A835) is not recognized.
Someone have a solution?
Thanks

Follow first the instructions into the thread http://www.vuplus-community.net/board/threads/usb-tuner-howto-report-problems.621/ to report basic infos about your hardware and DVB USB device.

 

[rogerpal]

Hy Angelofsky, please see the 4 attached output e tell me if you can sort my problem.

Thanks

 

[angelofsky1980]

Hy Angelofsky, please see the 4 attached output e tell me if you can sort my problem.

Thanks

There is one thing missing...
Please reboot your box and when the GUI comes up, issue the "dmesg" command because the one you have posted is incomplete of DVB init process.

 

[rogerpal]

Hy Angelofsky, I hope the output attached can help you to sort my problem

Thanks

 

[paolino]

Hy Angelofsky, I hope the output attached can help you to sort my problem

Thanks

Only one question. Did you done an online update to BH 2.0.1 rev. A? Your problem should be solved in rev. A (driver).

 

[rogerpal]

Hy Paolino, yes i've done the online update to 2.0.1 rev A and nothing good... Any suggestion?

 

[paolino]

Hy Paolino, yes i've done the online update to 2.0.1 rev A and nothing good... Any suggestion?

Try to disconnect all USB devices except of Aver Volar and reboot.

 

[rogerpal]

Try to disconnect all USB devices except of Aver Volar and reboot.

Thanks Paolino, now the tuner is reconized and works correctly

But if i put again the 8 GB USB with 2 partitions ext3 (UNIVERSE) and fat32 (PICON) dont work again !

I think the problem is the 8 GB USB.

Can anyone tell me how to format the 8GB USB to be sure everyting works?

Thanks a lot

 

[paolino]

Thanks Paolino, now the tuner is reconized and works correctly

But if i put again the 8 GB USB with 2 partitions ext3 (UNIVERSE) and fat32 (PICON) dont work again !

I think the problem is the 8 GB USB.

Can anyone tell me how to format the 8GB USB to be sure everyting works?

Thanks a lot

I think, that your problem is external USB hub. Your DVB-T needs separate USB input because of power.

 

[rogerpal]

At the last I've sort my problem changing the 8GB (transcend) with a newone TDK.

Thank a lot for support and advices.

Black Hole is the future of our boxes.