This board is now closed. The Blackhole image ended in 2020.
The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost.
We thank you for being part of the community for the last 15+ years.
You can join the OpenBh board if you have not already done so at www.openbh.net.
Black Screen on flash reboot
- Thread starter NjB
- Start date
a911
The BH Lover
Hye,
I have a Vu+ SOLO from 2010
It works without problem with BH 1.6.6 and VTI 3.2 for exemple
I Flashed a BH image 2.0.2
And I've got the blinking green after flash
But screen keep black after reboot
The same for the BH 1.7.9
The same also for VTI 5.1
NjB
Read few posts about installing new images!
May be U missed some steps!
NjB
Vu+ Newbie
Yes you 're wright,
I missed some steps.
Imagine that I had no problem with my old VTI Image I put when I bought first time my SOLO in 2010
Recently, I saw a very recent Black Hole wich flashed me
When I decided to flash it in my Vu+, I got the problem.
But it seems that I have to flash first the last Bootloader for my SOLO (cfe_solo_2.0)
Reboot
Then Flash my favorite Image
Thank You very much for your Help !!
NjB
I missed some steps.
Imagine that I had no problem with my old VTI Image I put when I bought first time my SOLO in 2010
Recently, I saw a very recent Black Hole wich flashed me
When I decided to flash it in my Vu+, I got the problem.
But it seems that I have to flash first the last Bootloader for my SOLO (cfe_solo_2.0)
Reboot
Then Flash my favorite Image
Thank You very much for your Help !!
NjB