Blackhole 1.6.6 - SCR configruation on both tuners

[Mfsav2]

Can you help me configure the tuners to take full advantage of the SCR?
I was able to configure a single tuner but do not know how to configure the second...
The cable is attached to Tuner 1...
It should be possible to configure both of them so that I can watch while recording.
Thank you for the help.

 

[Matrix10]

What is SCR ???

You can with only one and the same antenna/LNB record and watch from the same transponder but not at different transponders/at different frequency or different satellites.
For this you need a separate antenna / LNB for the second tuner.

So the configuration for your situation with one cable/LNB/Antenna is pass-true

 

[Cybergal]

@ Matrix

I think he means this here:
Single cable distribution


I know it in Germany with the name: Unicable Sat-Systeme ( Sat-SCR- LNB )

 

[Matrix10]

Thanks,

If so then I have no answer
because I never used this system

 

[Mfsav2]

Correct, I have an unicxable configuration

 

[valevale]

this is my configuration:
1 cable from LNB SCR connected to tuner A
I can record and watch from different transponder


Tuner A
Sat: Hotbird
LNB: LNB 1
Priority Auto
LOF Unicable
Unicable Mod: Unicable User defined
Channel: SatCR 1
Frequency 1210
LOF/L 09750
LOF/H 10600
threshold 11700
connected NO
DiSEqC NO

Tuner B
Sat: Hotbird
LNB: LNB 1
Priority Auto
LOF Unicable
Unicable Mod: Unicable User defined
Channel: SatCR 2
Frequency 1420
LOF/L 09750
LOF/H 10600
threshold 11700
connected yes
connected to TUNER A
DiSEqC NO

 

[Mfsav2]

this is my configuration:
1 cable from LNB SCR connected to tuner A
I can record and watch from different transponder


Tuner A
Sat: Hotbird
LNB: LNB 1
Priority Auto
LOF Unicable
Unicable Mod: Unicable User defined
Channel: SatCR 1
Frequency 1210
LOF/L 09750
LOF/H 10600
threshold 11700
connected NO
DiSEqC NO

Tuner B
Sat: Hotbird
LNB: LNB 1
Priority Auto
LOF Unicable
Unicable Mod: Unicable User defined
Channel: SatCR 2
Frequency 1420
LOF/L 09750
LOF/H 10600
threshold 11700
connected yes
connected to TUNER A
DiSEqC NO

Thank you very much!

 

[Cybergal]

Yes, this ist correct for HotBird 13East.
Attention: unicable have Limited user channels. One Tuner Need = One Channel, two Tuner Need two different Channel !

Könnt mich im deutschen Bereich kontaktieren, mein englisch ist nicht gut.

 

[Mfsav2]

Thank you, Great!

Now it appear to be working.

The only funny thing is that sometimes it refuses to schedule overlapping records... is that correct?

 

[Cybergal]

Have you also installed 2 SCR-Channel ?