Bug original image since 1.6.x

el_zari

el_zari

BH Lover
This bug is about:

Start the wizard provided for view is too buggy on Ultimo. It is likely that your satellite tuner configuration is not saved. If this happens, go into the settings menu one time the wizard to configure your installation completed sat.

Tested with 3 Vu+Ultimo (2 sat+1dvb turner) since 1.6.6 or above...

Thanks

Regards from Spain.
 
el_zari

el_zari

BH Lover
When you install a new image (Original, BH, etc....), in first setup don't save configuration Turner A and B.....

Turner SAT A ONE 19.2 ASTRA
Turner SAT B ONE 19.2 ASTRA
Turner DBV-T Europe.......

Tested on 3 Vu+Utimo....

I believe it´s a driver problem.

Thanks

Regards from Spain
 
Matrix10

Matrix10

Administrator
el_zari said:
When you install a new image (Original, BH, etc....), in first setup don't save configuration Turner A and B.....

Turner SAT A ONE 19.2 ASTRA
Turner SAT B ONE 19.2 ASTRA
Turner DBV-T Europe.......

Tested on 3 Vu+Utimo....

I believe it´s a driver problem.

Thanks

Regards from Spain
Click to expand...

Setup after installing the image is this OK?
(When the installation is already completed )
 
el_zari

el_zari

BH Lover
Yes, but the image don´t save turner sat configuration, but it saves dvbt turner configuration.

Read this, please:

Code: 
Many bugs exist in the sources that affect Given the novelty of Ultimo (especially the keyboard of the remote and wlan), especially if you use another skin that Vu_HD. If you have any concerns, always check that they also exist with the skin Vu_HD.
 
Start the wizard provided for view is too buggy on Ultimo. It is likely that your satellite tuner configuration is not saved. If this happens, go into the settings menu one time the wizard to configure your installation completed sat

Thanks

Regards from Spain
 
Matrix10

Matrix10

Administrator
I do not have this problem .

I have test with 2 tuners + DVBT
I have test with the same two satellites and with two different satellites.
I have no single SAT/LNB instalation i have a rotor but it is the same
I have put only one satellite in my configurations + DVB-T.
I have picture on both tuners and DVB-T.
After the restart image configuration is still good .
I do not know ,I do not have this problem.

Or I do not understand something correctly.
 
el_zari

el_zari

BH Lover
Matrix10 said:
I do not have this problem .

I have test with 2 tuners + DVBT
I have test with the same two satellites and with two different satellites.
I have no single SAT/LNB instalation i have a rotor but it is the same
I have put only one satellite in my configurations + DVB-T.
I have picture on both tuners and DVB-T.
After the restart image configuration is still good .
I do not know ,I do not have this problem.

Or I do not understand something correctly.
Click to expand...

After the restart image........? Have I restart the image after configure turners?

Maybe, "the bug" is for single Sat/lnb...Is it possible?

Thanks a lot again!!

regards from Spain
 
Matrix10

Matrix10

Administrator
Look on my shots all 3 tuners working
 

Attachments

  • shot1.jpg
    shot1.jpg
    1.2 MB · Views: 8
  • shot2.jpg
    shot2.jpg
    892.7 KB · Views: 9
  • shot3.jpg
    shot3.jpg
    440.9 KB · Views: 8
  • shot5.jpg
    shot5.jpg
    519.8 KB · Views: 7
el_zari

el_zari

BH Lover
Thanks Matrix10...

I'll try to explain it better:

The problem is that it does not save the configuration after the setup satellite tuners. So I have to to set the 2 turners SAT again in the menu because I lost the configuration.
 
Matrix10

Matrix10

Administrator
NO ,my configuration remains not changed .
This is 2sats the same Astra and plus DVB-T
 

Attachments

  • shota.jpg
    shota.jpg
    135.4 KB · Views: 7
  • shotb.jpg
    shotb.jpg
    135.1 KB · Views: 7
  • shotc.jpg
    shotc.jpg
    208.4 KB · Views: 7
  • shotd.jpg
    shotd.jpg
    145.4 KB · Views: 7
el_zari

el_zari

BH Lover
screenshotla.jpg


which turner Dvbt do you have? Can be that the issue?

Thanks again!!
 
Matrix10

Matrix10

Administrator
If you using 2 the same sats you can try to use Mode equal to
for one of your tuners.
I have not test this
because I do not have the problem that you described .
It is possible that you are using a backup for settings
that creates problems ????
 
el_zari

el_zari

BH Lover
Mode Equal to or mode Same not working in VuUltimo...

Certainly, there's the cable to connect the tuner cascade.
Perhaps you were accustomed to with the DUO which had the internal connectio: ultimo has external connection.

I don´t use backup. I have tested with: original, Bh, etc.....all the same: loose the turners sat config.

Thanks !!
 
el_zari

el_zari

BH Lover
Matrix10 said:
I thnink You must not use external connection if you have different and separate SAT instalation/LNBs.
Click to expand...

Of course my friend.. but I have only one antena and one Lnb ;) then I need the external connection Because if it does not work (I ended up insane with this topic)

Thanks a lot!!

Let's see if anyone with the 3 turners like me, does the testing.

Regards from Spain!!
 
You must log in or register to reply here.
Top