Cannot record on Vu+ Uno

X

x-xxxA

Vu+ User
I have an internal HDD and used to record without problems. Now as soon as I press the red button I have a Green Screen sending this logfile:

Code: 
<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
<enigma2>
<crashdate>Wed Feb 1 07:20:09 2012</crashdate>
<compiledate>Oct 12 2011</compiledate>
<contactemail>crashlog</contactemail>
<!-- Please email this crashlog to above address -->
<skin>skin.xml</skin>
<sourcedate>Oct 12 2011</sourcedate>
<branch>vuplus_experimental</branch>
<rev></rev>
<version></version>
</enigma2>
<image>
<dreamboxmodel>dm8000</dreamboxmodel>
<kernelcmdline>mem=48M mem=256M@0x20000000 rootfstype=jffs2 root=/dev/mtdblock0 rw console=ttyS0,115200</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=1000201110121437
comment=Vuplus
target=9
creator=OpenEmbedded <oe@vuplus.com>
url=http://www.vuplus.com/
catalog=http://www.vuplus.com/
]]>
</imageversion>
<imageissue>
<![CDATA[
Vuplus 2.1.0 + BlackHole 1.6.6 %h
 
]]>
</imageissue>
</image>
<software>
<enigma2software>
<![CDATA[
]]>
</enigma2software>
<dreamboxsoftware>
<![CDATA[
]]>
</dreamboxsoftware>
<gstreamersoftware>
<![CDATA[
]]>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
e!
doing version filtering
0012: 4e 0f 5d 03 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
[AutoRes] determineContent
action -> InfobarChannelSelection zapDown
playing 1:0:19:F5E:7D3:2:11A0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F5D:7D3:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F5D:7D3:2:11A0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:F5E:7D3:2:11A0000:0:0:0:
no version filtering
0012: 4e 0f 5e 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 0243
disable teletext subtitles
decoder state: play, vpid=515, apid=663
DMX_SET_PES_FILTER(0x203) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x297) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x243) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
not pauseable.
[AutoRes] service changed
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
+ 1/1 TID 00
done!
PATready
use pmtpid 0103 for service_id 0f5e
no version filtering
0103: 02 0f 5e 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 03 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0297), and the pcr pid is 0203, and the text pid is 0243
decoder state: play, vpid=515, apid=663
[eDVBCAService] new service 1:0:19:F5E:7D3:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F5E:7D3:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 82 bytes
9f 80 32 4e 03 0f 5e 03 00 13 01 81 08 01 1a 00 00 07 d3 00 02 82 02 01 00 84 02 01 03 1b 02 03 00 13 01 09 04 09 60 e5 04 09 04 09 61 e5 04 09 04 09 63 e5 04 06 02 97 00 13 01 09 04 09 60 e5 04 09 04 09 61 e5 04 09 04 09 63 e5 04 06 02 43 00 00
doing version filtering
0103: 02 0f 5e 03 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
+- 1/2 TID 4e
++ 2/2 TID 4e
done!
doing version filtering
0012: 4e 0f 5e 33 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
[AutoRes] determineContent
action -> InfobarChannelSelection switchChannelUp
allocating new converter!
reused converter!
reused converter!
reused converter!
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1328077171)
[EPGC] stop caching events(1328077171)
[EPGC] next update in 60 min
action -> OkCancelActions ok
playing 1:0:19:F12:7ED:2:11A0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F5E:7D3:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F5E:7D3:2:11A0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBCAService] remove channel 0x2e657ff8
[eDVBLocalTimerHandler] remove channel 0x2e657ff8
[eEPGCache] remove channel 0x2e657ff8
allocate channel.. 07ed:0002
[eDVBCAService] new channel 0x2e657ff8!
(0)tune
Entry for 28,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 36.000000, siteLongitude = 13.200000, 28.200000 degrees
PolarmountHourAngle=162.945554
RotorCmd = e112
RotorCmd e112, lastRotorCmd e112
prepare_sat System 1 Freq 12265000 Pol 0 SR 29500000 INV 2 FEC 3 orbpos 282 system 1 modulation 1 pilot 2, rolloff 0
tuning to 1665 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:F12:7ED:2:11A0000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
BlackHoleapi: popclose,
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x2e657ff8 running
[eDVBLocalTimerHandler] channel 0x2e657ff8 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x2e657ff8 running
stop release channel timer
[EPGC] next update in 49 min
no version filtering
0012: 4e 0f 12 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0201), and 1 audio stream(s) (0295), and the pcr pid is 0201, and the text pid is 0241
allocate demux
disable teletext subtitles
decoder state: play, vpid=513, apid=661
DMX_SET_PES_FILTER(0x201) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x295) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x201) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x241) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
not pauseable.
[AutoRes] service changed
+ 1/1 TID 00
done!
PATready
use pmtpid 0102 for service_id 0f12
no version filtering
0102: 02 0f 12 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 03 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
[SEC] set dynamic current limiting
+- 1/2 TID 4e
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0201), and 1 audio stream(s) (0295), and the pcr pid is 0201, and the text pid is 0241
decoder state: play, vpid=513, apid=661
[eDVBCAService] new service 1:0:19:F12:7ED:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:F12:7ED:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 82 bytes
9f 80 32 4e 03 0f 12 07 00 13 01 81 08 01 1a 00 00 07 ed 00 02 82 02 01 00 84 02 01 02 1b 02 01 00 13 01 09 04 09 60 e5 01 09 04 09 61 e5 01 09 04 09 63 e5 01 06 02 95 00 13 01 09 04 09 60 e5 01 09 04 09 61 e5 01 09 04 09 63 e5 01 06 02 41 00 00
doing version filtering
0102: 02 0f 12 07 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
++ 2/2 TID 4e
done!
doing version filtering
0012: 4e 0f 12 0b 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
[AutoRes] determineContent
[eDVBLocalTimerHandler] diff is 2
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 07:19:37
[eDVBLocalTimerHandler] m_time_difference is 2
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 316752 bytes for cache used
got unsupported FEC from frontend! report as FEC_AUTO!
 
sdt update done!
action -> InfobarChannelSelection switchChannelUp
allocating new converter!
reused converter!
reused converter!
reused converter!
action -> ChannelSelectBaseActions showFavourites
It's now Wed Feb 1 07:19:41 2012
[timer.py] next activation: 1328077282 (in 99999 ms)
It's now Wed Feb 1 07:19:42 2012
[timer.py] next activation: 1328077282 (in 99998 ms)
action -> ChannelSelectBaseActions showFavourites
action -> OkCancelActions ok
no ancillary data in audio stream... abort radiotext pes parser
nr_read 2762 nr_write 1000
sum 3762 prev_sum 3762
hdd IDLE!
[IDLE] 77643.9996989 600 True
action -> OkCancelActions ok
playing 1:0:1:C4A9:964:2:11A0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:F12:7ED:2:11A0000:0:0:0:
[eDVBCAService] free service 1:0:19:F12:7ED:2:11A0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBCAService] remove channel 0x2e657ff8
[eDVBLocalTimerHandler] remove channel 0x2e657ff8
[eEPGCache] remove channel 0x2e657ff8
allocate channel.. 0964:0002
[eDVBCAService] new channel 0x2e666a38!
(0)tune
Entry for 28,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 36.000000, siteLongitude = 13.200000, 28.200000 degrees
PolarmountHourAngle=162.945554
RotorCmd = e112
RotorCmd e112, lastRotorCmd e112
prepare_sat System 0 Freq 11526000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1776 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C4A9:964:2:11A0000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] set static current limiting
[SEC] setVoltage 1
[SEC] sleep 10ms
BlackHoleapi: popclose,
[SEC] setTone 0
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x2e666a38 running
[eDVBLocalTimerHandler] channel 0x2e666a38 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x2e666a38 running
stop release channel timer
[EPGC] next update in 55 min
no version filtering
0012: 4e c4 a9 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (090b), and 1 audio stream(s) (090a), and the pcr pid is 0907, and the text pid is ffffffff
allocate demux
disable teletext subtitles
PES filter: DMX_SET_PES_FILTER - Invalid argument
decoder state: play, vpid=2315, apid=2314
DMX_SET_PES_FILTER(0x907) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x90a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x90b) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
not pauseable.
[AutoRes] service changed
[SEC] set dynamic current limiting
+- 1/2 TID 4e
+ 1/1 TID 00
done!
PATready
use pmtpid 0103 for service_id c4a9
no version filtering
0103: 02 c4 a9 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 0f 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
++ 2/2 TID 4e
done!
doing version filtering
0012: 4e c4 a9 29 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (090b), and 1 audio stream(s) (090a), and the pcr pid is 0907, and the text pid is ffffffff
PES filter: DMX_SET_PES_FILTER - Invalid argument
decoder state: play, vpid=2315, apid=2314
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCAService] new service 1:0:1:C4A9:964:2:11A0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:C4A9:964:2:11A0000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 77 bytes
9f 80 32 49 03 c4 a9 05 00 13 01 81 08 01 1a 00 00 09 64 00 02 82 02 01 00 84 02 01 03 02 09 0b 00 13 01 09 04 09 60 e5 10 09 04 09 61 e5 10 09 04 09 63 e5 10 04 09 0a 00 13 01 09 04 09 60 e5 10 09 04 09 61 e5 10 09 04 09 63 e5 10
doing version filtering
0103: 02 c4 a9 05 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
[AutoRes] determineContent
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
[AutoRes] determineContent
got unsupported FEC from frontend! report as FEC_AUTO!
 
sdt update done!
action -> InfobarInstantRecord instantRecord
self.recording: []
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action -> WizardActions ok
pre:
[]
[TIMER] record time changed, start prepare is now: Wed Feb 1 07:19:48 2012
sanitycheck
check
checkTimerlist
recording service: 1:0:1:C4A9:964:2:11A0000:0:0:0:
record: 0
set rotor timeout to 360 seconds
[Timer] Record <RecordTimer.RecordTimerEntry object at 0x2e56a0f0>
ProcessRepeated
It's now Wed Feb 1 07:20:09 2012
[TIMER] activating state 1
begin_date: 20120201 0720
service_name: MUTV
name: †Stoke - Home 2011/12‡
description: Full coverage of this season's Barclays Premier League game against Stoke City.
[TIMER] Filename calculated as: '/hdd/movie/20120201 0720 - MUTV - Stoke - Home 2011_12'
recording service: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x2e5519c0> >
record: 0
[add callback]
use cached_channel
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C4A9:964:2:11A0000:0:0:0:
RECORD service event 6
tuned..
no version filtering
0012: 4e c4 a9 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
[TIMER] record event 2
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
RECORD service event 5
[TIMER] record event 6
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
query epg event id 944
found event.. store to disc
[TIMER] prepare ok, waiting for begin
[TIMER] activating state 2
[TIMER] start recording
[TIMER] record event 0
AddPopup, id = None
Recording to /hdd/movie/20120201 0720 - MUTV - Stoke - Home 2011_12.ts...
start recording...
RECORD: have 1 video stream(s) (090b), and 1 audio stream(s) (090a), and the pcr pid is 0907, and the text pid is ffffffff
ADD PID: 0000
ADD PID: 0907
ADD PID: 090a
ADD PID: 090b
before: 1
after: 1
setIoPrio realtime level 7 ok
FILEPUSH THREAD START
[TIMER] record event 4
next real activation is Wed Feb 1 09:00:00 2012
[timer.py] next activation: 1328077309 (in 99802 ms)
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 201, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1717, in recordQuestionCallback
self.startInstantRecording(limitEvent = answer[1] in ("event", "manualendtime") or False)
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1660, in startInstantRecording
simulTimerList = self.session.nav.RecordTimer.record(recording)
File "/usr/lib/enigma2/python/RecordTimer.py", line 660, in record
self.saveTimer()
File "/usr/lib/enigma2/python/RecordTimer.py", line 609, in saveTimer
file = open(self.Filename, "w")
IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml'
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x1c73bc0>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
]]>
</enigma2crashlog>
<pythonMD5sum>
<![CDATA[

Can you please inform what's the problem and what I have to do to solve it. Thanks.
 
IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml'
Click to expand...
It seems that your box hasn't got space to write any file.
Sometimes flash got full if you install picons but don't have a usb mounted in/media/usb, i this case all picons go in flash.
 
Tamaki said:
It seems that your box hasn't got space to write any file.
Sometimes flash got full if you install picons but don't have a usb mounted in/media/usb, i this case all picons go in flash.
Click to expand...

I have just opened the Vu+ Your Smart Linux TV Player on the PC and pressed the Red button to record from there. It started recording and when I went to record direct from Vu+ Uno it gave me no problem. For me problem solved, but don't know what really happened to cause this problem. Thanks all from all your help which was really appreciated.
 
You must log in or register to reply here.
Back
Top