Channels Freezing

A

amar

Vu+ Newbie
Getting a weird error on both my Uno's.

Over the last few weeks, a couple of channels have started to freeze every 10 seconds, anywhere from 5-30 seconds before resuming and freezing again.
its the same few channels on both receivers, mixture of SD and HD chans.
Snr on the channels is 40-70%.

Updated the firmware to blackhole 1.7.8, 2.0.3 and now to 2.0.5, still same problem.
updated the fpga as well
Checked the cables from the lnb, they seem fine.
Done a full tuner rescan, problem persists.
Only other thing I can think of doing is getting the dish and lnb checked out properly, we had some heavy wind in my area this last year.

Anything else I can try?
 
amar said:
Getting a weird error on both my Uno's.

Over the last few weeks, a couple of channels have started to freeze every 10 seconds, anywhere from 5-30 seconds before resuming and freezing again.
its the same few channels on both receivers, mixture of SD and HD chans.
Snr on the channels is 40-70%.

Updated the firmware to blackhole 1.7.8, 2.0.3 and now to 2.0.5, still same problem.
updated the fpga as well
Checked the cables from the lnb, they seem fine.
Done a full tuner rescan, problem persists.
Only other thing I can think of doing is getting the dish and lnb checked out properly, we had some heavy wind in my area this last year.

Anything else I can try?
Click to expand...

As U stated SNR on channels are between 40-70%...so LNB and dish alignments would be appropriate !
 
dish is aligned to 28.2e, not what info you need for the lnb.
I've a feeling the dish might have moved due to heavy winds and rain we've had over the last 2 years.
 
both scoot1690. fta ones and encoded, sd and hd.
mixture of chans of all.
still would like to hear your suggestion
 
You must log in or register to reply here.
Back
Top