Clueless, need help

[MSNBC]

Greetings,

I read some stuff but I'm still somehow clueless.

Open Black Hole 4.3.009 (installed all updates as of today using a LAN cable)

I have a D-Link DWA-125 Wireless N 150 USB-Adapter (Rev. A3) here.

This is what my Notebook Linux has to say about this adapter ...

51: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: Uc5H.VcTDYmemrUD
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0
SysFS BusID: 1-4:1.0
Hardware Class: network
Model: "D-Link DWA-125 Wireless N 150 Adapter(rev.A3) [Ralink RT5370]"
Hotplug: USB
Vendor: usb 0x2001 "D-Link"
Device: usb 0x3c19 "DWA-125 Wireless N 150 Adapter(rev.A3) [Ralink RT5370]"
Revision: "1.01"
Serial ID: "1.0"
Driver: "rt2800usb"
Driver Modules: "rt2800usb"
Device File: wlxb8a386902aa9
Features: WLAN
Speed: 480 Mbps
HW Address: b8:a3:86:90:2a:a9
Permanent HW Address: b8:a3:86:90:2a:a9
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v2001p3C19d0101dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rt2800usb is active
Driver Activation Cmd: "modprobe rt2800usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #50 (Hub)

I have attached WiFi_debug.txt

When I start the Network Assistant I don't see the adapter. Only get Network Access via LAN adapter.

 

[MSNBC]

I don't if it was todays update (3 packages) but all of a sudden the WLAN adapter appeared in the Network Manager and I was able to connect the box to the Internet wireless…

 

[MSNBC]

The driver network-usb-rt2800 does the job. Removed all the other drivers...