Common Interface

[Bruty]

Seems compability problem SMIT IRDETO CRW access problem.When I use @SMIT SECURE PLUS IRDETO CI+ modul work at restart ok....

 

[alez]

What is the actual status of supported CAM modules? Where i can find an updated list of supported CAMs?

 

[Larry-G]

here is a update of my CAM collection in the Vu+Uno

NB all cams have been tested and are working in my DM7020

===============

ORIGINAL CAMS

seca aston black rev 1.03 NOT DETECTED
viaccess black rev 1 NOT DETECTED
irdeto FULLY WORKING
conax ( technicrypt ) FULLY WORKING


magic / special cams

dragon module rev 2.06 with loader card ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
dragon module rev 3.02 ( firecrypt ) = damaged body ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
diablo (1) light rev 2.2 upgraded to 2.3 via software patch ( underworld 2.14 ) FULLY WORKING
diablo (1) light rev 2.2 ( not updated still 2.2 ) ( underworld 2.14 ) FULLY WORKING
icecrypt blue rev 2.01 NOT DETECTED
zeta red rev 2.01 NOT DETECTED
matrix reloaded ( mr 1.082 ) FULLY WORKING
matrix revolutions ( mrv 2.24 ) FULLY WORKING

i should have a Viaccess red cam ( early generation ) and a seca aston v 1.04 coming soon, i will test those and update this thread.

 

[Larry-G]

a few minor updates and alterations

ORIGINAL

seca aston black rev 1.03 NOT DETECTED
viaccess black rev 1 NOT DETECTED
irdeto 2 ( loader ver 3.1 / softcell ver 2.26D ) FULLY WORKING
conax ( technicrypt - technisat cx ) software ver 26.1.5.0.6 interface ver 0x40 FULLY WORKING


magic / special cams

dragon module rev 2.06 with loader card ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
dragon madule rev 3.02 ( firecrypt ) = damaged body ( predator 3.69 updated to pred 3.80 with loader card in Uno ) FULLY WORKING
diablo (1) light rev 2.2 upgraded to 2.3 via software patch ( underworld 2.14 ) FULLY WORKING
diablo (1) light rev 2.2 ( not updated still 2.2 ) ( underworld 2.14 ) FULLY WORKING
icecrypt blue rev 2.01 NOT DETECTED
zeta orange rev 2.01 NOT DETECTED
matrix reloaded ( mr 1.082 ) HW 1.5 / loader 1.0 FULLY WORKING
matrix revolutions ( mrv 2.24 ) HW 1.5 / loader 1.0 FULLY WORKING

 

[Larry-G]

viaccess red rev 1 v484 (software ver 1.0.484 / application ver 1.08.003 ) FULLY WORKING

 

[Larry-G]

seca aston black rev 1.04 FULLY WORKING

 

[Larry-G]

diablo 2 light ( diablo 1 rev 2.3 light updated to diablo 2 light via software patch ) ( Ipnosys034 ) FULLY WORKING

 

[Larry-G]

Irdeto 1 freecam ( softcell ver 2.06 ) FULLY WORKING

 

[Larry-G]

T-rex twin module ver 1.0/4.1 ( firecrypt ) FULLY WORKING

 

[Larry-G]

irdeto 2 ( consumer / purple ) (softcell 2.21A / application ver 1.11.003) FULLY WORKING

 

[Larry-G]

seca aston black rev 1.05 FULLY WORKING

 

[Larry-G]

cryptoworks ( phillips ) NOT DETECTED

 

[Larry-G]

T-rex super module rev 4.6 ( firecrypt ) ( PREDASAUR 2.40 ) FULLY WORKING

 

[KFL]

I have problem with reading entitlements, I do not see complete end dates on right. Where to change size of smartcard's window? It is very small.

 

[tanmenglin]

Dear Friends:
My VU SOLO2 receiver has a CAM interface , but it can descrambled the channel .and I use the same CAM card to try it with another receiver , it can descrambled the channel , why ? how do somebody can tell me ? thanks

 

[mahmudy]

der guys,

I have a problem VU DUo reveiver. I bought Irdeto card but receiver doesn't read the card. I am using Black Hole 2.0.5 Rev B and kernel 3.1.1.
Do you have any idea of the setup, any parameter or software?

Many thanks,

 

[angelofsky1980]

der guys,

I have a problem VU DUo reveiver. I bought Irdeto card but receiver doesn't read the card. I am using Black Hole 2.0.5 Rev B and kernel 3.1.1.
Do you have any idea of the setup, any parameter or software?

Many thanks,

Sure. Buy a CI CAM for your CA system (Irdeto).