This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Couple of green screens on BH 2.06 - Vu+ Solo

D

daniel1000

Vu+ Newbie
Hi Folks
couple of what appear to be minor crashes - they are not causing a problem
heres what happened
i have got a couple of green screen crashes on BH 2.06 so far
they happened both when i had finished scanning 28.2 - immediately after scan zapped a few channels - it crashed - same when tuning and scanning thor 0.8W - immediately after scan zapped a few channels and green screen - but after reboots box seemed stable again - so these crashes only happened immediately after scans on 2 different satellite positions - box has been stable since
I have crashlogs if anyone wants me to send them to somewhere - thanks
 
daniel1000 said:
Hi Folks
couple of what appear to be minor crashes - they are not causing a problem
heres what happened
i have got a couple of green screen crashes on BH 2.06 so far
they happened both when i had finished scanning 28.2 - immediately after scan zapped a few channels - it crashed - same when tuning and scanning thor 0.8W - immediately after scan zapped a few channels and green screen - but after reboots box seemed stable again - so these crashes only happened immediately after scans on 2 different satellite positions - box has been stable since
I have crashlogs if anyone wants me to send them to somewhere - thanks
Click to expand...

Post crashlog here please
 
The uploaded file does not have an allowed extension.
enigma2_crash_1382527248.log
wouldnt allow me to upload .log so i just renamed to .txt

- crash only happened while zapping channels immediately after scanning satellite positions - doesnt happen during normal channel zapping after reboot .....yet

hope this helps - thank you
 

Attachments

sorry - but i found another bug
scanned in sat position at 10.E - when i finished scan -

1. pressed up arrow --> went to satellites chose 10.0E
2. then pressed the "new" option (for newly found channels)
3. picked number (13 by default) - Nepali TV it zapped ok but when i tried to get out of it it would not - stuck on this channel - with the "busy" symbol going round and round in the top left of screen - but it did NOT crash
4. so i had to power off at the plug - reboot

5. went back into 10.0E and picked Nepali TV again - and the same thing happened it got stuck on that channel and would not come out of it - with the "busy" symbol going around and around in left hand side of screen

try it someone else who maybe has a fairly big dish > 1 metre and a positioner to see if you get the same as me ?
thanks
 
You must log in or register to reply here.
Back
Top