Diseqc Problems

[Alex Lagos]

Hi all,
My recieve has bh 2.0.9.1 \m/
Everything is working great but....
I have a problems with my Diseqc
At port A is : 13 hotbird
At port B is : 19.2 astra
At port C is : 23.5 astra (i just installed)
At port D is : 28.2 astra

When i start zapping everything is working fine at A-B-D
when i go to a channel from C (still working)
and try go back to a channel from A-B-D is not working
signal is going to zero and the only channels are working now is from port C
The only way to make A-B-D works back is to go to the tuner configuration and press OK
with the current setup and choose yes at the message apearing
I flash again the image and I install the tuner from the start but nothing
Sorry for my bad english

Any suggestions?

 

[zizoodiesel]

i had a similar issue and it was fixed by rechecking the cables outgoing from the diseq.
the cable of the satellite that blocks the other satellites signals was not plugged correctly so i replugged the cable and it went ok.
if that don't solve your problem try to replace the diseq, they break easily

good luck

 

[Alex Lagos]

I going to try that tommorow
I have a brand new Diseqc for backup.
I cant undestand one think...
When i am watch via webinterface (streaming) the all the ports are working fine.
I can zap all the channels from ABCD or DCBA