This board is now closed. The Blackhole image ended in 2020.
The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost.
We thank you for being part of the community for the last 15+ years.
You can join the OpenBh board if you have not already done so at www.openbh.net.
Duo2 BlackHole 3.0.8 VFD display problem
- Thread starter hrc.pin
- Start date
nunigaia
Moderator
The VFD Display is configured by default on image!
In any case if you want and know how to make modifications, you can do it by editing the "skin_user.xml" located at /etc/enigma2 , with for example notepad++ .
best regards
nunigaia
nunigaia
Moderator
Here you have the original BlackHole "skin_user.xml" file needed to VFD Display work properly.
Unzip the attached file to your PC, and by FTP ... using an FTP tool ( Filezilla, DCC, WinsCP etc .. ), send it to:
Code:
/etc/enigma2Restart your STB, then!
best regards
nunigaia
AlexWilMac
Moderator
Or you can try also this other version, which was modded by Eragon. It's a bit minimalist, but along with L4L, effective 
Or you can try also this other version, which was modded by Eragon. It's a bit minimalist, but along with L4L, effective
YES thx very very mutch is works thxxxx