Flashing VU+ SOLO issues resolved.

[CONOR]

Hi,
I just wanted to post an issue I resolved when flashing my box.
I was flashing from the original image to rhe BH image 1.6.6
I had issues, I was unplugging the box after it flashed and the LED turned from orange to red.
The box would not boot up then.
I found if i just removed the usb stich after the box finished flashing (led went from orange to red) the box would then boot up with the new image.

 

[sakisdvb]

Flashing the VU+ Solo.

-First Shutdown or unplug AC power cord.
-Disconnect All cables from Receiver.
-Load image to Fat32 USB Stick/Pen.
-Insert Usb Stick/Pen in front receiver USB port.
-Press power button or Plug power AC cord.
-Wait until Led terns Green and flashes rapidly.
-Remove USB Stick/Pen and press power button.