FTP Problem

[B.Bari]

Hi,
I used DCC in the past to FTP to my VU+Solo2, I recently changed the modem, I'm still able to connect but I can't see the directory/files of the box. The status shows as connected but its not showing anything from the box

 

[angelofsky1980]

Hi,
I used DCC in the past to FTP to my VU+Solo2, I recently changed the modem, I'm still able to connect but I can't see the directory/files of the box. The status shows as connected but its not showing anything from the box

Try with FileZilla first

 

[darian23]

have you changed your firewall settings too? Try to disable your firewall and try again.
It helped me out loooong time ago

 

[B.Bari]

Try with FileZilla first

Filezilla works fine but I prefer DCC if I can get it working...

 

[B.Bari]

have you changed your firewall settings too? Try to disable your firewall and try again.
It helped me out loooong time ago

I haven't changed anything on my laptop, only thing I changed is - new internet provider with the new modem...

 

[a911]

I haven't changed anything on my laptop, only thing I changed is - new internet provider with the new modem...

Check the following setup

 

[B.Bari]

Check the following setup
View attachment 12672

Thanks for your reply. I got exactly the same config, please see attached..

 

[darian23]

Look at the info on the bottom of your screen shot - 'ftp not ready'. What's the brand of your new router? Has it got internal firewall? Have you tried to disable your firewall?
As I've written above - I had same problem long time ago and the reason was my firewall. And I guess your problem is exactly the same.

 

[B.Bari]

Look at the info on the bottom of your screen shot - 'ftp not ready'. What's the brand of your new router? Has it got internal firewall? Have you tried to disable your firewall?
As I've written above - I had same problem long time ago and the reason was my firewall. And I guess your problem is exactly the same.

Router brand is Technocolor. The weird part is that DCC works fine on my other laptop but not on the one where I want it to work. I disabled the firewall on my laptop and that didn't help either..

 

[B.Bari]

Router brand is Technocolor. The weird part is that DCC works fine on my other laptop but not on the one where I want it to work. I disabled the firewall on my laptop and that didn't help either..

Also turned off the firewall on the router and that didn't help.

 

[darian23]

I think you've answered yourself - something is blocking communication between your laptop and box because 2nd laptop working fine. Not sure what it could be - security software, windows firewall? What firewall did you actually disable on your PC - Windows one? Do you have any additional security software installed on your PC? Do you use same OS on both laptops?
I can't think about anything else as I don't have access to your devices.

 

[B.Bari]

I think you've answered yourself - something is blocking communication between your laptop and box because 2nd laptop working fine. Not sure what it could be - security software, windows firewall? What firewall did you actually disable on your PC - Windows one? Do you have any additional security software installed on your PC? Do you use same OS on both laptops?
I can't think about anything else as I don't have access to your devices.

I use AVG antivirus, I disabled that, I disabled the windows firewall, there isn't any other security software I use, don't worry, I guess I'll have to use Firezilla - thanks again though.