how to get the installed VERSION of BH ???

X

xtajman

Vu+ Newbie
Plz is there a way to get the installed VERSION of BH beside about
all I get in MENU > information > About. is

Black Hole
Enigma: Feb 10 2011-vuplus_experimental
Image: Experimental 2011-02-10

Thanks
 
xtajman said:
Plz is there a way to get the installed VERSION of BH beside about
all I get in MENU > information > About. is

Black Hole
Enigma: Feb 10 2011-vuplus_experimental
Image: Experimental 2011-02-10

Thanks
Click to expand...
It should be the BH 1.4.5.
 
Thank you Paolino

:) I'm sure it a SOLO

another question Plz
is it possible to do a backup before I update the bootloader and the image ??
 
I don't have experiences with BH 1.4.5, now it's Fullbackup plugin, which allows you to do a full backup of your image. I think, that for you is important to do only your settings backup if you plan to upgrade to BH 2.0.1. I'm using Vu+ Control Centre (VUCC) and Dream Settings (2 backups is better than 1).
 
4. If solo's front led blinks continuously, restart box.

if the front led blinks does it mean it's updated or not ??
 
Like vuplus is telling, it's done (bootloader update for bigger then 48MB images). Remove your stick and reboot. Next you can update your image.
 
Thanks a lot Paolino for your help
i'll try to find some info on updating BH
juts one more thing, do i still need to do something else before I install BH ??
 
If you did a backup of your settings (it's not necessary, you can do a sat scan again).

Image is here http://www.vuplus-community.net/board/threads/black-hole-vu-solo-v-2-0-1-oe-2.11302/
How to upgrade the Vu+ Solo image via USB

  • Save the image on the PC (USB version)
  • Unzip files
  • Format USB flash drive with the file system FAT,or FAT32
  • Create on the stick folder /vuplus/solo
  • Copy to the stick the 3 files into /vuplus/solo
  • Power off VU+ STB
  • Remove all USB devices from the box
  • Plug-in the USB Stick into Vu+ Box
  • Turn on the VU+ STB
  • Firmware Update will start automatically
  • The Standby LED will be red and if the USB stick detected ,the LEDs lights up
  • If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box
  • Power off the VU+ STB , and restart it again
 
You must log in or register to reply here.
Back
Top