hi to all
I have a vu + uno and I want Mount the root_cfe_auto.jffs2
to edit somthing
I have sucsefuly Mount the root_cfe_auto.jffs2 as UBIFS and after I have packed with mkfs.ubifs and ubinize but when I flash my box vuuno it does not start and it stays on starting in vfd Here are my information
with ubinfo -a
and
and i have this error when i run
I do not know or are the problem
maybe you can help me
thank you
I have a vu + uno and I want Mount the root_cfe_auto.jffs2
to edit somthing
I have sucsefuly Mount the root_cfe_auto.jffs2 as UBIFS and after I have packed with mkfs.ubifs and ubinize but when I flash my box vuuno it does not start and it stays on starting in vfd Here are my information
Code:
root@sodo13-desktop:/mnt/ubi# mtdinfo -m 0 -u
mtd0
Name: NAND simulator partition 0
Type: nand
Eraseblock size: 131072 bytes, 128.0 KiB
Amount of eraseblocks: 1024 (134217728 bytes, 128.0 MiB)
Minimum input/output unit size: 2048 bytes
Sub-page size: 512 bytes
OOB size: 64 bytes
Character device major/minor: 90:0
Bad blocks are allowed: true
Device is writable: true
Default UBI VID header offset: 512
Default UBI data offset: 2048
Default UBI LEB size: 129024 bytes, 126.0 KiB
Maximum UBI volumes count: 128with ubinfo -a
Code:
root@sodo13-desktop:/mnt/ubi# ubinfo -a
UBI version: 1
Count of UBI devices: 1
UBI control device major/minor: 10:55
Present UBI devices: ubi0
ubi0
Volumes count: 1
Logical eraseblock size: 126976 bytes, 124.0 KiB
Total amount of logical eraseblocks: 1024 (130023424 bytes, 124.0 MiB)
Amount of available logical eraseblocks: 0 (0 bytes)
Maximum count of volumes 128
Count of bad physical eraseblocks: 0
Count of reserved physical eraseblocks: 10
Current maximum erase counter value: 1
Minimum input/output unit size: 2048 bytes
Character device major/minor: 250:0
Present volumes: 0
Volume ID: 0 (on ubi0)
Type: dynamic
Alignment: 1
Size: 1010 LEBs (128245760 bytes, 122.3 MiB)
State: OK
Name: rootfs
Character device major/minor: 250:1
Code:
root@sodo13-desktop:/mnt/ubi# mkfs.ubifs -m 2048 -e 126976 -c 4096 -r /mnt/ubi/rootfs/ rootfs.ubifs
root@sodo13-desktop:/mnt/ubi# ubinize -o new_root_cfe_auto.jffs2 -m 2048 -p 128KiB ubi.iniand i have this error when i run
Code:
root@sodo13-desktop:/mnt/ubi# ubinize -o new_root_cfe_auto.jffs2 -m 2048 -p 128KiB ubi.ini
ubinize: volume size was not specified in section "ubifs", assume minimum to fit image "rootfs.ubifs"78598144 bytes (75.0 MiB)I do not know or are the problem
maybe you can help me
thank you
