This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Is VU+ Duo ok for non-motor satellite + offset LNB?

P

Peter114

Vu+ Newbie
I've got a 100mm dish pointing at 16E, with an offset LNB for 28E. Do I need two coax feeds from the dish to the receiver (VU+ Duo Twin Tuner) and will the receiver see both satellites without me needing to switch cables? Any advice much appreciated.
 
Peter114 said:
I've got a 100mm dish pointing at 16E, with an offset LNB for 28E. Do I need two coax feeds from the dish to the receiver (VU+ Duo Twin Tuner) and will the receiver see both satellites without me needing to switch cables? Any advice much appreciated.
Click to expand...
Yes.
In case of one cable only, you can use 2 - 1 Diseqc switch, but you'll be able to watch only 1 sat at time and watch and record 2 channels from same transponder only.
 
You must log in or register to reply here.
Back
Top