Motorished Dish not automatically moving to different satellite when zapping channels

C

Captkiwi

Vu+ Newbie
Hello All,

I have a VU+ SOLO2 with blackhole 2.04 and a moterished dish setup - Moteck SG-2100A. I have tried these settings Henksat/Vhannibal/catseye.

My tuner configuration is USALS: Positioner - East/North - the correct longitude/latitude

When i goto menu -> setup --> service searching --> satfinder. I can position my dish selecting the right satellite for example 28.2 E.
After positioning with the satfinder i can zap through my channels of the bouquets 28.2E

When i zap for example to a channel of satelite position 13E the rotor is not responding.
it shows the icon of a sattelite dish that its busy moving to the 13E but the dish its not moving at all.

So changing to another sattelite in my setting bouqette the motor is not responding/moving to the channel change.
But if i do it manual with satfinder it goes to the correct satellite.

I followed also this tutorial i found here "tuner-config-tutorial-for-motor-dish-setup.12884" but still the same problem:

What setting in Blackhole is causing this ? Can anybody help me with this ?
 
fixed issue with blackhole 2.04 and the usals settings, flashed to openpli worked straight out of the box. will try blackhole now and again if things get fixed.
 
'these things' are fixed from bh first release, there is no problems with my motor at all and many users will agree with me;
you need to be patient at the beginning when setting up your box, answer questions which users asked you if you need help.
You probably had outdated satellites.xml file or incorrect tuners settings, but did not give us a chance to help you.
Sad.
 
You must log in or register to reply here.
Back
Top