NETGEAR A6100 WLAN issue [8812au]

[draski09]

Dear forum members,

today I updated the software via, settings, software management.

After finishing the software update and reboot, the USB WLAN stick (Netgear A6100) is no longer recognized by my VU+ Zero.

I also installed the IPK rtl8188eu_git-r2-bh3_vuzero.ipk, but without success.

Current running version:

firmware. Blackhole 3.0.9 .O
Build: 2020-05-11-master
kernel: 3.13.5

Request for assistance with troubleshooting.

THX Draski09

 

[angelofsky1980]

Dear forum members,

today I updated the software via, settings, software management.

After finishing the software update and reboot, the USB WLAN stick (Netgear A6100) is no longer recognized by my VU+ Zero.

I also installed the IPK rtl8188eu_git-r2-bh3_vuzero.ipk, but without success.

Current running version:

firmware. Blackhole 3.0.9 .O
Build: 2020-05-11-master
kernel: 3.13.5

Request for assistance with troubleshooting.

THX Draski09

Your device should use the Realtek 8812au driver and not the 8188eu.

I've checked both driver sources but your device is not listed (according to a quick web search done).
I need USB IDs of your device to make a more specific search and, hope, to fix the issue.

 

[draski09]

Your device should use the Realtek 8812au driver and not the 8188eu.

I've checked both driver sources but your device is not listed (according to a quick web search done).
I need USB IDs of your device to make a more specific search and, hope, to fix the issue.

thanks for the driver information.
have just installed it, but the stick is still not recognized.

enclosed the information about the stick:

802.11ac WLAN adapter:

Product ID: 0x9052
Vendor ID: 0x0846 (NETGEAR, Inc.)
Version: 2.00
Serial Number: 00e04c000001
Speed: Up to 480 MBit/s
Manufacturer: Realtek
Location ID: 0x14330000 / 12
Available current (mA): 500
Required current (mA): 500
Additional operating current (mA): 0

 

[angelofsky1980]

Install these two IPK in your box and let me if your device will be detected....

 

[draski09]

Install these two IPK in your box and let me if your device will be detected....

Thank you very much, it worked perfectly.

K.R Draski