New box from Vu+ ---> Vu+ Uno

Zupy

Zupy

Vu+ User+++
Here is some pictures of new box (I dont have hw specification yet) :)

vuuno2.jpg

vuuno4.jpg
 
alez said:
About exterior: it seems a remake of this other Marusys box:

http://www.engadget.com/2010/04/19/marusys-ms630s-and-ms850s-set-top-boxes-stream-straight-to-your/
Click to expand...

It's very similar to MS430S also which has the following features:

• System Specification

2 DVB-S Tuner
Linux Operating System
12 Digit VFD (Vacuum Fluorescent Display)
S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output
True Color OSD (On-Screen-Display)
Very Low Stand-by Power Consumption(<1W)
Supports DVB Teletext and Subtitle and Memorize DVB Teletext up to 1000 pages
Memory for up to 3500 TV and 1500 Radio Channels PiP (Picture-in-Picture)
• Multimedia Support

Digital Picture Viewer with Diverse Slide Show Effects
Music-Player and Various Plug-In Applications Support
• PVR Feature

Record Two Channels while Time-Shift Another Channel using State-Of-The-Art FPGA
Easy Recording through Super-Fast EPG
Stand-alone Recording Edit Function
• Interface for External Device

USB 1.0 Host Interface for Digital Camera, Memory Stick, and Other Devices
10/100 Mbps Ethernet
Remote Video Play Function through Ethernet
Easy-To-Use PC Software for Set-top Box Control and File Exchange

430_1.png

430_2.png

430_3.png


Staremo a vedere se si tratta dello stesso oggetto...
 
No... should not be 430 since is DVB-S and not DVB-S2 but MS630S (as Alez said before)

Here are the MS630 features:
• System Specification

DVB-S2 Tuner
Linux Operating System
12 Digit Alphanumeric VFD (Vacuum Fluorescent Display)
Crystal Clear HDMI Output
S/PDIF Output for Digital Audio and Dolby AC-3 Bit Stream Output
True Color OSD (On-Screen-Display)
Very Low Stand-by Power Consumption (<1W)
Supports DVB Teletext and Subtitle and Memorize DVB Teletext up to 1000 pages
• Multimedia Support

Digital Picture Viewer with Diverse Slide Show Effects
Music-Player and Various Plug-In Applications Support
UPnP renderer working as a client set top box of MS 850S, Marusys HD PVR
• Interface for External Device

USB 2.0 Host Interface for Digital Camera, Memory Stick, and Other Devices
Basic PVR Functions through HDD with USB 2.0 Interface
10/100 Mbps Ethernet
Remote Video Play Function through Ethernet
Easy-To-Use PC Software for Set-top Box Control
External SATA Interface(for External HDD)
Support of Wi-Fi USB dongleONOFF

630_1.png

630_2.png

630_3.png
 
rockerduck said:
No... should not be 430 since is DVB-S and not DVB-S2 but MS630S (as Alez said before)

Here are the MS630 features:
Click to expand...


Please DON'T CREATE CONFUSION, this box have nothing to do with the next Vu+ Uno and Ultimo.
Next Vu Uno and Ultimo boxes will have the NEW BCM 7413 processor that is the current top available in the linux receivers.
the BCM7413 offers one of the highest levels of single-chip system performance available for STB applications with high-speed 2D and 3D graphics processing

Dm800se : bcm 7401
Dm7020hd: bcm 7401
Et-9000: bcm 7401
Vu+ Uno: bcm 7413
vu+ Ultimo: bcm 7413

http://www.broadcom.com/products/IPTV/IPTV-Solutions/BCM7413
 
I'm not creating confusion. I said that the box "is very similar to".
As said elsewhere... it's better to wait and see...
 
but ı read this

VU+UNO

CPU BroadCom: 7405, 1 Tuner, Memoria RAM: 256 MB Advanced multi-format decoder supporting the following:

• HD/SD H.264/AVC Main and High Profile to Level 4.1 (HD),Level 3.1 (SD)
• HD/SD AVS Jizhun Profile Levels 2.0, 4.0, and 6.0 (720p and 1080i for HDTV)
• VC-1 Advanced Profile @ Level 3, Simple and Main Profile
• HD/SD MPEG-2 Main Profile at Main and High levels
• MPEG still image decode
• SD MPEG-4 P2 SP/ASP
• HD DivX 3.11/4.11/5.x/6x/Home Theater
• Advanced audio processor supporting the following:
• AAC LC, AAC LC+SBR Level 2, AAC+ Level 2, AAC-HE
• Dolby® Digital, Dolby Digital Plus
• MPEG I layers 1, 2, and 3 (MP3)
• Windows Media®and Windows Media Pro audio
• One pair of on-chip stereo high-fidelity audio DACs
• 3D SRS audio support
• One I2S input port and one I2S output port, plus S/PDIF output
• High-performance 2D-effects graphic engine
• Studio-quality text and graphics at HD resolution
• Supports multiple layers and windows
• Digital noise and contour reduction (DNR/DCR)
• Reduces artifacts such as block/mosquito noise
• Picture-in-picture
• Supports simultaneous HD+SD display
• Mosaic Mode
• Supports up to 16 video decode/display for video-rich navigation
• Motion-adaptive deinterlacer with reverse 3:2/2:2 pulldown
• OpenCable™ ready with on-chip MPOD support
• 400-MHz Dual-Core CMT MIPS32®/16e class processor
• 64-bit DDR2 DRAM controller
• Dual SATA-2 interfaces for DVR and DVD applications
• HD analog video encoder with simultaneous SD outputs
• NTSC-M/J, PAL-BDGHIN/M/Nc, SECAM analog outputs
• 480i/480p/576i/576p/720p/1080i output formats
• Component RGB/YPrPb HD/HD-DVO outputs
• Macrovision® 7.1/NICAM support
• SCART 1 and 2
• Component, S-Video, and composite via six on-chip V-DACs
• VBI encoders for CC/TTX with NABTS/CGMSA/WSS/ Gemstar®, AMOL I/II standards and dedicated TTX sideband
• RF modulator with BTSC encoder
• ITU-R-656 input and output ports
• HDMI 1.3/DVI 1.0 Mac and PHY with HDCP 1.1
• Broadcom security processor
• AES/1DES/3DES/CSS/CPRM/DTCP copy protection
• MPEG-2/DIRECTV/DVB/ARIB data transport demux with 1DES/3DES/DVB/Multi2/AES descramblers
• V.92-capable soft modem with integrated SiLab Si305x system side device
• Dual USB 2.0 host controller with host transceiver
• Additional host/client USB 2.0 controller/transceiver
• Dual Ethernet MACs with integrated single PHY and MII
• UHF remote control receiver
• Dual SmartCard support
 
Why make confusion

On the net there are ten specifications
and are mostly all false
Wait and see

I would ask you agn
not to put unofficial and not verified informations
related to the technical specifications of the box on our forum.

This only brings confusion and speculative informations on NET.
When the information is with 100% certainty known or verified.
We will keep you informed.
Of course you can discuss about it
but without the transfer of unreliable informations.
 
Logan said:
Please DON'T CREATE CONFUSION, this box have nothing to do with the next Vu+ Uno and Ultimo.
Next Vu Uno and Ultimo boxes will have the NEW BCM 7413 processor that is the current top available in the linux receivers.
the BCM7413 offers one of the highest levels of single-chip system performance available for STB applications with high-speed 2D and 3D graphics processing

Dm800se : bcm 7401
Dm7020hd: bcm 7401
Et-9000: bcm 7401
Vu+ Uno: bcm 7413
vu+ Ultimo: bcm 7413

http://www.broadcom.com/products/IPTV/IPTV-Solutions/BCM7413
Click to expand...

This is completely incorrect information.

Dm500hd, dm800se have BCM7405
Don't know for DM7020HD.
ET9000 has BCM7405+3d+PiP which equals BCM7413. Actually, when booting (you can see it in the serial console) it reports having BCM7413.
 
malakudi said:
This is completely incorrect information.

Dm500hd, dm800se have BCM7405
Don't know for DM7020HD.
ET9000 has BCM7405+3d+PiP which equals BCM7413. Actually, when booting (you can see it in the serial console) it reports having BCM7413.
Click to expand...

I think exists 2 series of ET9K boxes: one with BCM7405 and one with BCM7413 but I should verify this case.
 
:lol: :confused:

Receiver CPU Model CPU MHZ

Marusys MS630S = Brcm4380 V4.4 FPU V0.1 400
VU+ DUO = Brcm4380 V4.4 FPU V0.1 400
ET 9000 = Brcm4380 V4.4 FPU V0.1 400
Xtrend XXXX = Brcm4380 V4.4 FPU V0.1 400
DM XXXX = Brcm4380 V4.4 FPU V0.1 400

• Open-Source Linux Betriebssystem (Enigma2) :yes:
• Broadcom Mips Prozessor :yes:

:idea:
 
What is true? 7405(with 3D) or 7413? Where to ask for correction/report bug? Probably OpenWebif has bug.
Code: 
root@vuuno:~# lsmod
Module                  Size  Used by    Tainted: P
...
dvb_bcm7413          6053261 25 fpga_directc,brcmfb
...
root@vuuno:~#
or
Code: 
OpenWebif -> Infos -> Box Info
Chipset:    7405(with 3D)
 
Last edited:
cobra2011 said:
:lol: :confused:

Receiver CPU Model CPU MHZ

Marusys MS630S = Brcm4380 V4.4 FPU V0.1 400
VU+ DUO = Brcm4380 V4.4 FPU V0.1 400
ET 9000 = Brcm4380 V4.4 FPU V0.1 400
Xtrend XXXX = Brcm4380 V4.4 FPU V0.1 400
DM XXXX = Brcm4380 V4.4 FPU V0.1 400

• Open-Source Linux Betriebssystem (Enigma2) :yes:
• Broadcom Mips Prozessor :yes:

:idea:
Click to expand...

You are watching the WRONG information because the family of CPU is the same for all boxes you mention.
The correct field to evaluate is "system type" (the one reported here is from my Solo2):

Code: 
system type  : BCM7346B2 STB platform
 
You must log in or register to reply here.
Back
Top