This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

OBH & Vu+ Zero 4K DVB-C

T

Testo79

Vu+ Newbie
Hi guys

Last week, I bought a Vu+ Zero 4K DVB-T / C. I installed OBH image on it. The installation ran smoothly. However, Scanning DVB-C channels doesn’t return and channel. I installed BH and there, I could retrieve the channels. Any guess?
 
Hi Mick
Thank you
I do not have the provider neither on BH nor on OBH. I use frequency steps method for both of them. With BH, I can find them but not with OBH. I'll have a second look at it
 
Try the attached one: is taken from my OBH. Unzip it and put in
/etc/tuxbox/
and restart the GUI.
I don't have cable services but it's the original from OBH (4.3.023, of course): don't tell me you don't have 4.3! ;)
 

Attachments

You should be able to copy the cables.xml file from Black Hole, onto your desktop, by right clicking, on the file, then send it to your Open Black Hole folder, overwriting the other cables.xml file, using Filezilla.
 
You must log in or register to reply here.
Back
Top