Problem with BlackHole 3.1.0 Multistream & DVB-C

[vyper1]

Hello

I have some problems with the BlackHole 3.1.0.E, I performed several tests on a VuDuo2 (DVB-S & DVB-C) and with a VuDuo4KSE (2xDVB-C)
The BlackHole 3.1.0 works fine in DVB-S on the VuDuo2 but when I switch on a DVB-C channel, green screen and restart, problem is identical with the VuDuo4KSE
I specify that no plug-in was installed during my tests, new image freshly installed
I also tested the OpenBH 4.4 on these 2 boxes, and it works without problems in DVB-C

I attach the crash.log

If someone has an idea, a lead
Thanks for your help

 

[Matrix10]

I have cable TV on two boxes
DUO4K and Ultimo 4K
On both boxes, the last BH image cable TV works without any problems.

So are you sure you didn’t insert some backup or bad cable list into the image.
Try scanning again.
Or even better absolutely clean and upgraded image and scan cable again.

 

[vyper1]

I have cable TV on two boxes
DUO4K and Ultimo 4K
On both boxes, the last BH image cable TV works without any problems.

So are you sure you didn’t insert some backup or bad cable list into the image.
Try scanning again.
Or even better absolutely clean and upgraded image and scan cable again.

Thank you very much for the reply.
I redid some tests and indeed the problem is related to the configuration of the tuners.
I initially configured in "Provider" mode according to my local provider and redo an automatic scan (490 services are found, but it crashes)
I then tried with the "Frequency steps" mode it works and no longer crashes, but only 215 are found VS 490.

I don't have this problem with OpenBH 4.4 but I will continue my tests

Thanks a lot for your help

 

[Matrix10]

BH is more sensitive if something is wrong
than OBH.
I guess there is some error or bug in the tuner configuration
or in cables.xml .