This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Problem with Meoboot

x30pvr

x30pvr

Vu+ Newbie
Dear Freind ,

I have foramted USB flash memory with EXT3 linux format , but, after installing it to VU SOLO and going to Memoboot section , the system cannot detect it , so i have some question

first , which format is known formt for vu solo with blackhole 1.5.1
second , how to format flash with STB

Thanks
 
x30pvr said:
Dear Freind ,

I have foramted USB flash memory with EXT3 linux format , but, after installing it to VU SOLO and going to Memoboot section , the system cannot detect it , so i have some question

first , which format is known formt for vu solo with blackhole 1.5.1
second , how to format flash with STB

Thanks
Click to expand...

Have you mounted your USB stick as /media/hdd OR /media/usb ?
 
Hi x30pvr,

I Would recommend to format with win FAT32 , then format with STB (2x blue> device manager>.yellow),,,mount USB (save)
finally install meoboot plugin,,,it worked 4me , hofully 4U!

GdLuK!
a911
 
a911 said:
Hi x30pvr,

I Would recommend to format with win FAT32 , then format with STB (2x blue> device manager>.yellow),,,mount USB (save)
finally install meoboot plugin,,,it worked 4me , hofully 4U!

GdLuK!
a911
Click to expand...

hi a911 ,

i hvae done task based on your recomand , however, sytem dont detect usb
is there any fault that i didt pay attention it

because after format usb by system , i strted to moute from following way

pressing green then going to memoboot and finally press red

pls help me more

thanks
 
a911 said:
Hi x30pvr,

I Would recommend to format with win FAT32 , then format with STB (2x blue> device manager>.yellow),,,mount USB (save)
finally install meoboot plugin,,,it worked 4me , hofully 4U!

GdLuK!
a911
Click to expand...

sir ,

also after doing your solution , the sytem told me for remaping what is it ?
what means of remap device

thanks
 
Hi x30pvr

Mount @ Device manger:-

2x blue> choose mount location, mapping.. (as Anglo said : media/usb.) move RC arrows <> left or right!
Then press red,,,info window will appear.... OK....e2 restart.
There is more posts that talk about the issue , please read,,,its more fun,,,:ice:!
And good way 2 learn!

Have Fun w/BH Image!

Rgdz
a911
 
a911 said:
Hi x30pvr

Mount @ Device manger:-

2x blue> choose mount location, mapping.. (as Anglo said : media/usb.) move RC arrows <> left or right!
Then press red,,,info window will appear.... OK....e2 restart.
There is more posts that talk about the issue , please read,,,its more fun,,,:ice:!
And good way 2 learn!

Have Fun w/BH Image!

Rgdz
a911
Click to expand...

Dear Sir ,

Also there is a new problem
all task that you told me was finished as well as , and also i did based on following help
http://vuplus-community.net/board/threads/meoboot-short-user-guide.1899/

However, system after booting doesnt show a new boot so as to select new one just automatically go to okd one

thanks
 
Sir ,

I have reached up to following sentence :

Now, when you open MeoBoot you will see all the installed images and you will able to manage them.​
You will be able to choice the image for next boot (green button), to delete a multiboot image (yellou button) or to use MeoBoot Tools (blue button).​

so , after this step i dont know how to switch in new image or maybe system doesnt go to new boot​

thanks​
 
Do U know how 2use DCC program?
if yes!
Do the following
go to the path....media\USB\MbootUpload...ftp the new image,,,,go to meboot .,,press the red B (Install image)...now U'll see the image there,,,etc!

And remember BH Team do not support images on Multi boot ( USB external Flash) as always posted..Only image @ enternal flash,,,so this as far I will go,,,only use meoboot for testing new other images for the fun of it , thats all...and then go back to BH 95% of the time!

Gdluck
a911
 
a911 said:
Do U know how 2use DCC program?
if yes!
Do the following
go to the path....media\USB\MbootUpload...ftp the new image,,,,go to meboot .,,press the red B (Install image)...now U'll see the image there,,,etc!

And remember BH Team do not support images on Multi boot ( USB external Flash) as always posted..Only image @ enternal flash,,,so this as far I will go,,,only use meoboot for testing new other images for the fun of it , thats all...and then go back to BH 95% of the time!

Gdluck
a911
Click to expand...
Oh Thanks a lot for time that you vest for me

yes i know how to use from ftp program such as filezilla and so one and also I have put one image in mentioned adress and also I installed it ,
but no any changing after installation

system started to reeboot and also went to new multiboot page ,however, i cannot select new image and run it

also you told me , BH doesnt support image which installed in external usb , so by this way i want to now what is usage of this new option

thanks and best regards
 
U"r free 2use what ever u like, however,check the image U'r putting @ meoboot upload may be the file is corrupted,,,and would recommend go for clean BH 1.5.1 image for multi boot,,,lets see!
 
You must log in or register to reply here.
Back
Top