This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

tuner or image

carwash

carwash

Vu+ Newbie
Hi
I had image 2.1.7 image in box and decided to change to latest image and that's were the problems start.
installed image through usb no problems, started all OK I then decided to update image 3.0.1. it did then restarted, the problem I get is Low SNR ie 38 to 43% best on 30%W Hispasat Zon Tv & Meo tv but the Spanish side on that tranpnder shows 89%
Could it have happened on the update drivers or Im I missing something

My set up is 1 Lnb/simple/ single/hispasat
 
carwash said:
Hi
I had image 2.1.7 image in box and decided to change to latest image and that's were the problems start.
installed image through usb no problems, started all OK I then decided to update image 3.0.1. it did then restarted, the problem I get is Low SNR ie 38 to 43% best on 30%W Hispasat Zon Tv & Meo tv but the Spanish side on that tranpnder shows 89%
Could it have happened on the update drivers or Im I missing something

My set up is 1 Lnb/simple/ single/hispasat
Click to expand...

Check your connection cables ( sat ones ).
 
Thanxs nunigaia

I think i solved the problem, due to strong winds (Madeira) the dish has lost it's alignment giving me a low to none SNR on cloudy/rainy days and up to 70% on good clear days.

Regards
 
You must log in or register to reply here.
Back
Top