Twin tuner not working on Blackhole image

H

Hashashin

Vu+ Newbie
Hi

I have a problem when i try to use both tuner at the same time with my vu+ solo SE and the blackhole image
When i record a channel with tuner A, i get a black screen with all other channels with tuner B
I have a twin LNB with 2 output and 2 cables are connected to the solo SE tuner A and tuner B
LNB1: Hotbird (13°E)
LNB2: Astra (19,2°E)

The tuner A is well configured (Diseq A/B, port A: Hotbird, port B: Astra...)
Tuner B = Tuner A

All channels are working (Astra & Hotbird)
I tested separately with only one cable on tuner A then on tuner B, everything is OK

Before switching to the solo SE i have had the same problem with my Vu+ Duo...
I tested with Blackhole 2.1.7 and 3.0.1
I don't remember which version exactly but i have not encountered this issue with oldest version of BH image

I don't have this issue with the VTI 8.2.3 image with the same tuner's configuration
I prefer the BlackHole image so...if someone have the solution ;-)

Thanks
 
You have separate cables running to each tuner from the lnb?
Setup tuner B identical to A: (Diseq A/B, port A: Hotbird, port B: Astra...etc.)
Do not use Tuner B = Tuner A.
 
Yes i have separate cables
I have already tried the same settings for both tuners
(Tuner B = Tuner A is the same thing i think)

Just installed VTI 9.0.1 and no issues :-/
I will try later other images like OpenPLI...

Thanks
 
Hashashin said:
Hi

I have a problem when i try to use both tuner at the same time with my vu+ solo SE and the blackhole image
When i record a channel with tuner A, i get a black screen with all other channels with tuner B
I have a twin LNB with 2 output and 2 cables are connected to the solo SE tuner A and tuner B
LNB1: Hotbird (13°E)
LNB2: Astra (19,2°E)

The tuner A is well configured (Diseq A/B, port A: Hotbird, port B: Astra...)
Tuner B = Tuner A

All channels are working (Astra & Hotbird)
I tested separately with only one cable on tuner A then on tuner B, everything is OK

Before switching to the solo SE i have had the same problem with my Vu+ Duo...
I tested with Blackhole 2.1.7 and 3.0.1
I don't remember which version exactly but i have not encountered this issue with oldest version of BH image

I don't have this issue with the VTI 8.2.3 image with the same tuner's configuration
I prefer the BlackHole image so...if someone have the solution ;-)

Thanks
Click to expand...
Your issue can be related to the following thread: http://www.vuplus-community.net/board/threads/general-informations.25760/ ?
 
You must log in or register to reply here.
Back
Top