This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

VU DUO+ HELP!!

H

hoffmann

Vu+ Newbie
hello guys! MEOBOOT was trying to use and I think I put it in flash,now appears to me starting unit only and does not leave it! How do I recover the same.

Thanks
hoffmann
 
I would recommend that U re-install the BH image, then go to>the Device Manger >mount the USB that you will use for Meoboot >> save (E2 will restart)!
Now U'r ready to install Meoboot, at External Flash (USB media)!

RgdZ
a911
 
Good Day Friend! The problem that the decoder is just starting ... on the LCD and it does not stay in the network, so do not have access to anything or DCC!
 
hoffmann said:
Good Day Friend! The problem that the decoder is just starting ... on the LCD and it does not stay in the network, so do not have access to anything or DCC!
Click to expand...

If you have a USB stick connected, remove it.... The box should start correctly ....
 
hoffmann said:
Hi angelofsky1980!
I'm not with any USB flash drive connected to it! I ask for help!
Click to expand...

Ok.
Usually the common problem of "Starting ..." is the presence of a uncompatible USB stick.
I suggest to reflash your box. If this doesen't work you can try to flash using a serial cable. If it fail, the only thing to do is to inspect your box with a serial cable and view what goes wrong on boot process.
 
You must log in or register to reply here.
Back
Top