This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Vu is dead, the screen reads VU DOU

M

markmr3

Vu+ User
I changed the capacitor the other day as the red led was stuck on and everything worked for a day or so. I have now come home and the stb reads vu duo on its screen. I have no channels. I have turned it off and restarted it but still the same. I then took all the leads out of the back and left it for a hour then restated it but still it reads vu duo. Im not stuck as to wot to do. Any help please
 
Its not letting me do anything. It wont accept anything through usb. It just says vu duo on the stb screen. Im going to leave it all unplugged over night the switch it on in the morning. I don't know what else to do
 
The bootloader information appears on start up, when you first switch it on, at the rear, it is the CFE v? information.
Are you certain you changed the right capacitor, and replaced it with the correct version? Check for any other bulging capacitors, and for any signs of damage, loose solder, on the circuit board.
 
Hi and thanks. I did find a bulging capacitor and changed it but still the same. I left it switched on and after 3 days it has now just restarted. Im leaving it alaon for a hour or so then I wil try to use it.
 
You must log in or register to reply here.
Back
Top