VU+solo 2 image usb problem

[boncuk59]

hi guys i am new with Vu+solo2 used to have dreambox 800se hd never had a problem flashing images. but with vu i follow all the steps to do but when i unzip image file instead of
......>
1) /vuplus/solo/root_cfe_auto.jffs2
2) /vuplus/solo/kernel_cfe_auto.bin
3) /vuplus/solo/boot_cfe_auto.jffs2,
its unzip like this
......>
1) splash_cfe_auto.bin ,
2) root_cfe_auto.bin,
3) reboot.update
4) kernel_cfe_auto.bin
5) initrd_cfe_auto.bin,
when i put on usb , usb flashes then on receiver it say starting i am going crazy ,where am i going wrong is there another way to do it plz help ??????
just realize i might be in wrong place so sorry
thanx

 

[Shiro]

It is all ok but you have to follow the exact procedure.
Be sure to have a FAT32 formatted stick
transfer the zip file into stick
unzip the file into stick so you will have the folders vuplus/solo2/xxxxx
insert in solo2 and poweron
when you read on display "upgrade" push the power button on the frontal box.

 

[boncuk59]

It is all ok but you have to follow the exact procedure.
Be sure to have a FAT32 formatted stick
transfer the zip file into stick
unzip the file into stick so you will have the folders vuplus/solo2/xxxxx
insert in solo2 and poweron
when you read on display "upgrade" push the power button on the frontal box.

ok shiro i try it now thanxwill

 

[boncuk59]

It is all ok but you have to follow the exact procedure.
Be sure to have a FAT32 formatted stick
transfer the zip file into stick
unzip the file into stick so you will have the folders vuplus/solo2/xxxxx
insert in solo2 and poweron
when you read on display "upgrade" push the power button on the frontal box.

thanx Shiro, BH image just come on i let you know but after 3 days thanx again