vu solo 2 lmb setup

[gencrow]

hi

i have a fix sky dish and a multi satellite dish which way do i connect them to the receiver with what setings

thanks

Paul

 

[scubidoo]

You must use a diseq and connect a the fix dish on one port and the other dish to second one.
After that set the receiver to advanced configuration on tuner configuration
Set lnb1 and config the diseq to use the 1 port then set 2 lnb for all satelite and the 2 port of diseq

This if you use usals. If the motor dish have a positioner and actuator you have to config one lnb for each sat you have and point all off them to second port off diseq

 

[gencrow]

thanks i will give it a try over weekend