This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

VU+ Solo 2 set limits problem

P

Pianoman

Vu+ Newbie
While finding satellites in the positioner setup section, I accidentally pressed the green limit west button . Now I can't move the dish any further west. I have tried pressing the red limits off button but the dish still wont move to the west. can anyone help.
Blackhole 2.1.0
vbox
 
At what point did you set your West limit?
I assume you are using a V-Box II, have you checked you haven't set the limits in that?
Can you move the dish West using your V-Box II?
Try setting up a satellite, like 30 West, and storing it, then go into the menu, setup, service searching, tuner, tuner A, and select 30 West, then scroll to the bottom, turn off Usals and enter the position you set for 30 West.
 
Thanks for your reply, I managed to sort it by re-setting the limits on the v-box remote by holding down the limits key for 10 seconds. I can work out why my vu box can set limits but not change them once set.
 
You must log in or register to reply here.
Back
Top