This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Vu+ Solo black screen

P

Pelle Andersson

Vu+ Newbie
Hi!

I having problem with my Vu+ Solo.
The screen is black after flashing it with Openpli 4.0
All looks ok after flashing, green blinking led.
After turning power off and removing the usb stick and turning power on again the screen is black.
The led is green.
Have down this sevaral times but same thing, black screen.

A guess I have is that I powered on the Solo to fast after switching it off the first time wich caused some corruption in the box.
 
Non è un clone.... allora come posso procedere? ho anche aggiornato il bootloader (CFE-SOLO-2.0) ma nulla..
 
no, non va (si, ho preso la 2.1)...... sempre schermo nero!!! le ho provate tutte, non so più come muovermi....
 
conte71 said:
Non è un clone.... allora come posso procedere? ho anche aggiornato il bootloader (CFE-SOLO-2.0) ma nulla..
Click to expand...


If it's not a clone box and the bootloader (update thread is http://www.vuplus-community.net/board/threads/vu-solo-boot-loader-updgrade.4358/ ) is correctly updated (make sure you haven't any other USB device than the USB pendrive connected to the box to avoid upgrade problems!) the box MUST bootup with latest images.
One more thing is to grab a serial output during upgrade process (serial null modem cable + putty) but I'm pretty sure it's a clone.
 
You must log in or register to reply here.
Back
Top