This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

VU TURBO TUNER

M

mialy

Vu+ Newbie
Hi got vu+solo2 want to use vu turbo tuner I have done a full backup on a usb stick now want to flash new image bh 2.1.7 do I connect tuner up to box first or do I flash image first then connect tuner after or does anybody know of a guide on how to set up turbo tuner appreciate any help thanks mialy
 
You just need to flash your box with the 2.1.7 image, then plug the turbo tuner in, and reboot the box (you can plug the tuner in first if you wish, it won't make any difference).

Once the box boots, you should be able to setup the turbo tuner in the tuner configuration menu.
 
Ev0 said:
You just need to flash your box with the 2.1.7 image, then plug the turbo tuner in, and reboot the box (you can plug the tuner in first if you wish, it won't make any difference).

Once the box boots, you should be able to setup the turbo tuner in the tuner configuration menu.
Click to expand...
Thanks mialy
 
You must log in or register to reply here.
Back
Top