VU+ Ultimo and Dual DVB-T2/T/C tuner

[Optix]

Hi all,

I have a VU+ Ultimo with a single DVB-T tuner (Tuner A) and 2 single DVB-S2 tuners (Tuner B and C). It is running Blackhole 3.0.4.C and working fine.

I am trying to install a Dual DVB-T2/T/C tuner so I can have 4 tuners: 2x DVB-S2 and 2x DVB-T but I cannot get it to work.

I managed to get the 4 tuners recognised by Blackhole by having the 2 single DVB-S2 tuners installed in slots A and B, and the dual DVB-T tuner in slot C.

However, I am not getting the picture for the DVB-T channels:
- On some channels, I am getting a very pixelated picture that comes and goes as the SNR keeps switching from 0% to 99%
- On other channels, I am getting no picture at all as the SNR stays at 0%

I tried to restart the box multiple times, took the dual tuner out and reinstalled it but it is still the same.

Does someone have the same configuration as this setup and if so could share how to get it to work please?

Thanks,

Optix

 

[Ev0]

It should work fine with the dual tuner in slot C.

Silly question, but have you set the tuner to dvb-t as it usually defaults to dvb-c when you first install it.

 

[Optix]

Thanks for the reply. I did set the 2 tuners to DVB-T and that's when I got the pixelated picture on some of the channels.