Vu Uno problema doppo led rosso....

titetolo · Feb 6, 2015

Ho fatto la procedura della jtag e finalmente e tornato in vita il Vu Uno, ma riesco a fare il flash da usb , ho provato diverse immagini ( anche l'originale), e rimane sulla schermata iniziale della impostazione della lingua, e non me da la possibilità di interagire con il telecomando . Ho aperto Hyperterminal e mi da questo log , mi potette aiutare.....

[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
Startting the hotplug events dispatcher
udevd (101): /proc/101/oom_adj is deprecated, please use /proc/101/oom_score_adj
instead.
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
udevd-event[232]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a d
irectory

done
driver is installed
mount: mounting /dev/sda1 on /media/hdd failed: No such file or directory
/dev/sda: No such file or directory
/dev/sda: No such file or directory
cat: can't open '/etc/videomode': No such file or directory
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
ldconfig: Can't open configuration file /etc/ld.so.conf: No such file or directo
ry
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
Configuring dbus
Adding system startup for /etc/init.d/dbus-1.
Configuring wpa-supplicant
Configuring ppp
Configuring r8192cu
Configuring avahi-daemon
Adding system startup for /etc/init.d/avahi-daemon.
Configuring enigma2
Configuring update-modules
Configuring vsftpd
Adding system startup for /etc/init.d/vsftpd.
Configuring vuplus-bootlogo
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... bcmemac: eth0 NIC Link is Down
eth0 no wireless extensions.

udhcpc (v1.15.3) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
done.
Starting system message bus: dbus.
Creating Dropbear SSH server RSA host key.
Will output 1024 bit rsa secret key to '/etc/dropbear/dropbear_rsa_host_key'
Generating key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAAAgwCDUFu8HXKUY/mpY/63tfOoZcCJ6aPYaUfeKH3u+qCw
Xwk2yvOqUltDZ7D4BT52WsuVamEbBiZAop8ZmcTWKMQXtpt+FVodGZ6OpklfH34PEwrxRU6qOgYRvjMh
PdBy6YOf+OJfoUUP0vAr3dCAa2catOWNB7TN1ein+MrD6qdBFsLZ root@vuuno
Fingerprint: md5 33:cc:59:07:b6:a6:a2:ec:bf:08:8a:48:a2:85:94:76
Starting Dropbear SSH server: dropbear.
Starting internet superserver: inetd.
Starting openvpn:.
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... done.
Starting automounter: done.
[ ok ]rting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
- double buffering available!
5670kB available[LCD]: unknown cmd 0x1015
for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6ceda8 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Hdmi CEC driver
+ (20) UHF Modulator
couldnt open [CI]:ci_dev_open

[CI]:entering.. A NEXUS_DvbCi_Open

+ (20) RC Input[CI]:NEXUS_DvbCi_Open done..

layer
+ (20) m[CI]:Installing callbacks

isc options
+ ([CI]:Forcing card check

20) AVSwitch Dri[CI]:Card insertion status changed

ver
+ (21) inpu[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

Input device "d[CI]:Installing callbacks

reambox advanced[CI]:Forcing card check

remote control [CI]:Card B insertion status changed

(native)" is not a keyboard.
Found 1 input devices!
+ (21) Con[CI]: CI interface initialised

sole RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
sc[CI]:ci1_dev_open

anning for common interfaces..
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
can't open /etc/enigma2/lamedb: No such file or directory
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 4
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
no profile data available
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'mtdblock5': blacklisted
found block device 'mtdblock6': blacklisted
found block device 'mtdblock7': blacklisted
unable to load config ([Errno 2] No such file or directory: '/etc/enigma2/settin
gs'), assuming defaults...
not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_
user.xml'
main thread is non-idle! display spinner!
menu_mainmenu
Preferred tag editor set to None
Reading satellites.xml
main thread is non-idle! display spinner!
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM, need rotorwo
rkaround No, enabled No, DVB-S2 Yes
slot: 0 configmode: nothing
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
can't open /etc/enigma2/bouquets.tv: No such file or directory
recreate bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/bouquets.tv
resolve: -> /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
can't open /etc/enigma2/bouquets.radio: No such file or directory
recreate bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/bouquets.radio
resolve: -> /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/userbouquet.favourites.tv
resolve: -> /etc/enigma2/userbouquet.favourites.tv
resolve: resolve ${sysconfdir}/enigma2/bouquets.tv
resolve: -> /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/userbouquet.favourites.radio
resolve: -> /etc/enigma2/userbouquet.favourites.radio
resolve: resolve ${sysconfdir}/enigma2/bouquets.radio
resolve: -> /etc/enigma2/bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
Installing image defaults
Reading .info file /usr/share/enigma2/defaults/Dream/dm8000.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm800.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm7025.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm500hd.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm7020hd.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm800se.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
prerequisites: {u'hardware': ['dm8000']}
prerequisites: {u'hardware': ['dm800']}
prerequisites: {u'hardware': ['dm7025']}
prerequisites: {u'hardware': ['dm500hd']}
prerequisites: {u'hardware': ['dm7020hd']}
prerequisites: {u'hardware': ['dm800se']}
self.packageslist: [({'prerequisites': {u'hardware': ['dm8000']}, 'attributes':
{u'config': [{'directory': '/usr/share/enigma2/defaults/Dream/', 'name': 'settin
gs.8000'}], u'favourites': [{'directory': '/usr/share/enigma2/defaults/Dream/',
'name': 'bouquets.tv'}, {'directory': '/usr/share/enigma2/defaults/Dream/hdbouqu
ets/', 'name': 'userbouquet.favourites.tv'}], 'filestype': 'directories', 'name'
: 'Dream Multimedia Default', 'author': 'Dream Multimedia GmbH'}}, '/usr/share/e
nigma2/defaults/Dream/dm8000.info')]
installing package with index 0 and name Dream Multimedia Default
currentAttributeIndex: 0
installing skin with index 0
currentAttributeIndex: 1
installing config with index 0
merging config: /usr/share/enigma2/defaults/Dream/ - settings.8000
currentAttributeIndex: 1
installing config with index 1
currentAttributeIndex: 2
installing favourites with index 0
installing favourites: /usr/share/enigma2/defaults/Dream/ - bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
currentAttributeIndex: 2
installing favourites with index 1
installing favourites: /usr/share/enigma2/defaults/Dream/hdbouquets/ - userbou
quet.favourites.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
117 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
currentAttributeIndex: 2
installing favourites with index 2
currentAttributeIndex: 3
installing package with index 0
currentAttributeIndex: 4
installing services with index 0
end of package reached
set status to DONE
installing done!
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[FONT] adding font /usr/share/fonts/MyriadPro-Regular.otf...OK (Regular)
[FONT] adding font /usr/share/fonts/MyriadPro-Semibold.otf...OK (Semibold)
[FONT] adding font /usr/share/fonts/MyriadPro-SemiboldIt.otf...OK (Semiboldit)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropr
iate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropr
iate ioctl for device >
cannot open /proc/stb/avs/0/input_choices
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 127
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
Activating keymap: Keyboard English
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language English
language set to en_EN
FIXME: request for unknown slot
FIXME: request for unknown slot
/usr/lib/python2.6/site-packages/gdata/tlslite/utils/cryptomath.py:9: Deprecatio
nWarning: the sha module is deprecated; use the hashlib module instead
import sha
<ManualFancontrol> setPWM to : 10
<ManualFancontrol> init : self.fanoffmode : OFF
<ManualFancontrol> init : config.plugins.manualfancontrols.pwmvalue.value : 10

[UIPositionSetup] write dst_left : 0
[UIPositionSetup] write dst_width : 720
[UIPositionSetup] write dst_top : 0
[UIPositionSetup] write dst_height : 576
<RemoteControlCode> Write Remote Control Code : 2
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
It's now Thu Jan 1 01:01:19 1970
[timer.py] next activation: 179 (in 99838 ms)
timers.xml not found!
It's now Thu Jan 1 01:01:19 1970
[timer.py] next activation: 179 (in 99775 ms)
prepared cmd: echo 0 > /proc/stb/fp/mouse
prepared cmd: echo "copypsrc" > /proc/stb/fb/alpha_op
prepared cmd: echo "0x0" > /proc/stb/fb/alpha_value
prepared cmd: killall -15 arora
killall: arora: no process killed
[CrashReport] auto submit
[CrashReport] no crash-log
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
updateList
done
allocating new converter!
warning, skin is missing element arrowdown2 in <class 'Screens.LanguageSelection
.LanguageWizard'>
warning, skin is missing element wizard in <class 'Screens.LanguageSelection.Lan
guageWizard'>
updating language...
updateList
done
selectPic: arrowdown
selectPic: arrowup
setPixmapNum(0) failed! defined pixmaps: []
setValue 100
[AUD]: AUDIO_SET_MUTE 0
Setvolume: 100 1[AUD]: AUDIO_SET_MIXER -837009936
00 (raw)
Setvol[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0

[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
Setvolume: 100 1[AUD]: AUDIO_SET_MIXER -837009936
00 (raw)
Setvol[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70

[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 28(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(17)
child has terminated
pipes closed
[Network.py] resolv.conf - opening failed
nameservers: []
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [0,
0, 0, 0], 'up': True, 'mac': '00:1d:ec:03:ff:72', 'dhcp': True, 'netmask': [0,
0, 0, 0], 'gateway': [0, 0, 0, 0]}}
poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
bcm7413: hotplug_callback():
Hotplug - status.connected 1
bcm7413: hotplug_callback():
Hotplug - connecting HDMI to display 0xf
bcm7413: hotplug_callback():
Hotplug - status.connected 0
bcm7413: hotplug_callback():
Hotplug - Disconnecting HDMI from display
bcm7413: hotplug_callback():
Hotplug - status.connected 0
bcm7413: hotplug_callback():
Hotplug - status.connected 1
bcm7413: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
It's now Thu Jan 1 01:02:59 1970
[timer.py] next activation: 279 (in 99998 ms)
It's now Thu Jan 1 01:02:59 1970
[timer.py] next activation: 279 (in 99997 ms)
bcmemac: eth0 NIC Link is Up 100 Mbps Full Duplex
It's now Thu Jan 1 01:04:39 1970
[timer.py] next activation: 379 (in 99999 ms)
It's now Thu Jan 1 01:04:39 1970
[timer.py] next activation: 379 (in 99997 ms)

Eragon · Feb 6, 2015

Prova a resettare il codice del telecomando al valore di default.

Discussione spostata.

titetolo · Feb 6, 2015

Ma con il Vu duo che ho in altra camera il telecomando funziona bene....

Eragon · Feb 6, 2015

Il codice usato del telecomando va appaiato con quello impostato sul decoder, ed il Duo usa un codice diverso (Mode 1) da quello dell'Uno (Mode 2)...

Quindi in condizioni di default dell'immagine i 2 decoder usano codici diversi, per questo che il telecomando dell'Uno, se ti funziona con il Duo, non puo' funzionare con l'Uno impostato come di default...

Vedi:
http://www.vuplus-community.net/board/threads/duo2-using-older-remote.14593/#post-109913

titetolo · Feb 6, 2015

Grazie mille per l'aiuto , ma io tengo premuto 2 e 7 ma led non si accende e non cambia niente ....Ho provato anche su vuduo e anche li non si accende led. Non so dove sbaglio...

Eragon · Feb 6, 2015

Strano, sui telecomandi originali dovrebbe funzionare tranquillamente.
Prova a tenere schiacciati contemporaneamente i tasti un po' piu' a lungo, eventualmente prova a mettere delle batterie nuove.

titetolo · Feb 6, 2015

Niente , uguale cambiando le batterie, mi sembra strano , via seriale con lo stesso versione ( ovviamente file nfi ), va fino a 40% poi si blocca per errore, non riesco ad aggiornare via seriale ( anche firmware l'originale) , solo da usb.....

Vu Uno problema doppo led rosso....

titetolo

Vu+ Newbie

Eragon

Vu+ User+++

titetolo

Vu+ Newbie

Eragon

Vu+ User+++

titetolo

Vu+ Newbie

Eragon

Vu+ User+++

titetolo

Vu+ Newbie