vu zero 4k not powering on after standby.

[scorpion007]

Hi I need some advise my zero 4k does not power back on after long standby overnight the led flashes on the remote and on the front of the box but nothing happens, To restart it I have to switch it off from the rear button then it will reboot. I only use BH and OBH images, can anyone advise me as I need to know if the zero is faulty.

 

[AlexWilMac]

Are you sure your box it's not simply put in Deep Standby by the powertimer?
BEFORE this happens, can you see on the front LCD the same picture you see when you put in Standby? Because from deepstandby there is no sign of activity for many seconds and the TV might stay off, too.
How much have you waited for the box to restart before using the power switch?

 

[scorpion007]

Hi Ive waited around 30 seconds. the VU led flashes with the remote button but it doesnt power on. I found a setting on the hdmi cec to wake the vu from standby and tried this morning and it worked. Never had to do this on my old ultimo my be things have changed.

 

[AlexWilMac]

HDMI-CEC is never enabled by default. If you don't enable it, VU+ won't switch the TV on.

 

[Doonie]

Hi I need some advise my zero 4k does not power back on after long standby overnight the led flashes on the remote and on the front of the box but nothing happens, To restart it I have to switch it off from the rear button then it will reboot. I only use BH and OBH images, can anyone advise me as I need to know if the zero is faulty.

What resolution do you run on BH? I'm guessing 2160p, if you try to change it to 1080p and set everything to standby, wait 30s and start. Does it work? (sitting in same boat with Uno 4k SE)

 

[scorpion007]

What resolution do you run on BH? I'm guessing 2160p, if you try to change it to 1080p and set everything to standby, wait 30s and start. Does it work? (sitting in same boat with Uno 4k SE)

Since I used the latest bh image 3.0.5F onwards its been ok, 1080P is what I use.

Sent from my SM-G950F using Tapatalk