Dachtus
Vu+ Newbie
I need your help on this....
I have a wi-fi adapter TP-Link WN821N (http://www.tp-link.com/products/productDetails.asp?pmodel=TL-WN821N) and i want to use it with my Vu+Solo...
I have already checked with iwconfig command via telnet but nothing found...
With cat /proc/bus/usb/devices command via telnet i have these information
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=1002 Rev= 1.06
S: Manufacturer=ATHER
S: Product=USB2.0 WLAN
S: SerialNumber=12345
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=04(O) Atr=03(Int.) MxPS= 64 Ivl=125us
Can anyone help me and inform me if this usb wi-fi stick is compatible with my Vusolo?
Or if there is any trick to make work with my box?
I have a wi-fi adapter TP-Link WN821N (http://www.tp-link.com/products/productDetails.asp?pmodel=TL-WN821N) and i want to use it with my Vu+Solo...
I have already checked with iwconfig command via telnet but nothing found...
With cat /proc/bus/usb/devices command via telnet i have these information
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=1002 Rev= 1.06
S: Manufacturer=ATHER
S: Product=USB2.0 WLAN
S: SerialNumber=12345
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=04(O) Atr=03(Int.) MxPS= 64 Ivl=125us
Can anyone help me and inform me if this usb wi-fi stick is compatible with my Vusolo?
Or if there is any trick to make work with my box?
