Gigabyte U7000

N

neograniceni

Vu+ Newbie
It seems Gigabyte U7000 is not supported anymore after 2.1.0.1 :sad: (Solo). Will post log data after some future BH 2.1.x installation 'coz at the moment I went back to 2.1.0.1.
 
Last edited:
Just to bump this message a little bit and to ask for help if anything could be done according to my Gigabyte U7000 USB DVB-T tuner. Yesterday I've tested the latest BH 2.1.7 after almost a year since the last time I did a go to BH upgrade, but Gigabyte U7000 still doesn't work, at least not with my Vu+ Solo. It shows dummy stick / unsupported :-(. Then I flashed Open BH 0.1 and the stick was detected and worked correctly. But Open BH is so unstable on my box, too often stuck on boot (reflashed several times without success), so I went back to 2.1.0.1. Here is the BH 2.1.0.1 dmesg log in case it could help, will reflash BH 2.1.7 today later and post dmesg log from it.
 

Attachments

neograniceni said:
Just to bump this message a little bit and to ask for help if anything could be done according to my Gigabyte U7000 USB DVB-T tuner. Yesterday I've tested the latest BH 2.1.7 after almost a year since the last time I did a go to BH upgrade, but Gigabyte U7000 still doesn't work, at least not with my Vu+ Solo. It shows dummy stick / unsupported :-(. Then I flashed Open BH 0.1 and the stick was detected and worked correctly. But Open BH is so unstable on my box, too often stuck on boot (reflashed several times without success), so I went back to 2.1.0.1. Here is the BH 2.1.0.1 dmesg log in case it could help, will reflash BH 2.1.7 today later and post dmesg log from it.
Click to expand...
After BH 2.1.7 flash have you done all online updates before generating dmesg output?
 
angelofsky1980 said:
After BH 2.1.7 flash have you done all online updates before generating dmesg output?
Click to expand...

That dmesg output I've attached before is from BH 2.1.0.1 where the tuner works OK (the last BH where it works), just in case it might help to see what firmware and/or driver is required/detected. I will post BH 2.1.7 dmesg output later today (am not at home right now). So I will perform clean reflash + online updates before dmesg.
 
neograniceni said:
That dmesg output I've attached before is from BH 2.1.0.1 where the tuner works OK (the last BH where it works), just in case it might help to see what firmware and/or driver is required/detected. I will post BH 2.1.7 dmesg output later today (am not at home right now). So I will perform clean reflash + online updates before dmesg.
Click to expand...
Thanks
I need the 2.1.7 output to determine the problem.
I'll put here the link for my debug file that is more accurante respect simple dmesg output: http://www.vuplus-community.net/boa...images-debug-script-per-le-immagini-bh.21512/
 
You must log in or register to reply here.
Back
Top