I will need help I have duo4k &
Ultimo4k both s2x Tuner...
how to configure multi stream channels?
Thank you
For manual scanning a single transponder:
System = DVB-S2
Transport Stream Type = Multistream
Input Stream ID = number for multistream_id.
Example for satellite Astra-4A (4.9°E) 12341 H 30000 3/4 Multistream_id=40:
Result:
For automatic scanning or scanning for one satellite:
In the file /etc/tuxbox/satellites.xml
the line describing the transponder must have an attribute "is_id=multistream_id".
Example:
<transponder frequency="12341000" symbol_rate="30000000" polarization="0" fec_inner="3" system="1" modulation="2" is_id="30"/>
<transponder frequency="12341000" symbol_rate="30000000" polarization="0" fec_inner="3" system="1" modulation="2" is_id="40"/>
If the transponder uses PLS mode, then do not forget about it:
For manual scanning a single transponder:
Set the parameter "PLS-Mode" to the necessary value - root, gold or combo;
Input the necessary value for parameter "PLS-Code".
Example:
For automatic scanning or scanning for one satellite:
In the file /etc/tuxbox/satellites.xml
the line describing the transponder must have an attributes "pls_mode" & "pls_code" with necessary values:
pls_mode:
root = 0,
gold = 1,
combo = 2.
Example for 5.0°W and 11179 V 300000:
<transponder frequency="11179000" symbol_rate="30000000" polarization="1" fec_inner="7" system="1" modulation="2" is_id="4" pls_code="131070" pls_mode="1"/>
<transponder frequency="11179000" symbol_rate="30000000" polarization="1" fec_inner="7" system="1" modulation="2" is_id="5" pls_code="131070" pls_mode="1"/>
<transponder frequency="11179000" symbol_rate="30000000" polarization="1" fec_inner="7" system="1" modulation="2" is_id="12" pls_code="131070" pls_mode="1"/>
<transponder frequency="11179000" symbol_rate="30000000" polarization="1" fec_inner="7" system="1" modulation="2" is_id="13" pls_code="131070" pls_mode="1"/>