Ciao angelo ho trovato in giro queste informazioni sul mio device credi che possono essere utili? Ora te le posto
Bus 002 Device 006: ID 0572:c688 Geniatech T230 DVB-T2 TV Stick
usb 2-4: new high-speed USB device number 4 using ehci-pci
usb 2-4: New USB device found, idVendor=0572, idProduct=c688
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4: Product: USB Stick
usb 2-4: Manufacturer: Max
usb 2-4: SerialNumber: 080116
dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
i2c i2c-5: Added multiplexed i2c bus 6
si2168 5-0064: Silicon Labs Si2168 successfully attached
si2157 6-0060: Silicon Labs Si2147/2148/2157/Si2158 successfully attached
usb 2-4: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/input/input24
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
si2168 5-0064: found a 'Silicon Labs Si2168' in cold state
si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
si2168 5-0064: found a 'Silicon Labs Si2168' in warm state
si2157 6-0060: found a 'Silicon Labs Si2146/2147/2148/2157/2158' in cold state
si2157 6-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
NOTE: This device needs I2C-Mux support in kernel or as kernel module (CONFIG_I2C_MUX).
Firmware for both the demodulator and tuner are necessary. OpenELEC
dvb-firmware collection includes firmwares for this device too.
- dvb-demod-si2168-b40-01.fw
- dvb-tuner-si2158-a20-01.fw
- dvb-tuner-si2158-a20-01.fw
Place the 2 firmware files in /lib/firmware.
md5sum:
d8da7ff67cd56cd8aa4e101aea45e052 dvb-demod-si2168-b40-01.fw