ASUS My Cinema U3100 Mini DVBT PLUS Tuner [af9035]

Gucio

Vu+ Newbie
I bought a DVB-T Asus My Cinema U3100 Mini DVB-T tuner and I do not know which driver to use. I tried all, but at no time to scan channels is not. Many thanks for your help. Sorry for the mistakes, but it is google translator.
 

angelofsky1980

BlackHole Driver Specialist
I bought a DVB-T Asus My Cinema U3100 Mini DVB-T tuner and I do not know which driver to use. I tried all, but at no time to scan channels is not. Many thanks for your help. Sorry for the mistakes, but it is google translator.

Your device is supported by "Hauppauge WinTV Nova-T Stick" drivers as reported here.
Please test and report if your device works properly or not.
Remember also to set up, if the device is recognized correctly, the right terrestrial configuration into Enigma2 Tuner Config panel.
 

Gucio

Vu+ Newbie
I had a version of "PLUS". After a two-day battle I gave it to the store. The subject is not valid. Thanks again for your willingness to help. You can close it
 

angelofsky1980

BlackHole Driver Specialist
I had a version of "PLUS". After a two-day battle I gave it to the store. The subject is not valid. Thanks again for your willingness to help. You can close it

Ok.
I will change the title of this thread and I hope that other people who has at home the "PLUS" version can report the tech data needs to implement it.
 

ALPA

BH Lover
My local shop have asus mycinema u3000 hybrid usb.
Before I buy I would like to know if this one is supported by BH.
Also I have question, in order to scan cable dvb channels does the stick must be dvb-c or you made possible with drivers any dvb-t tuner to scan cable channels?
 

Odiseh

Vu+ Newbie
Any update about ASUS U3100 plus model?
Thanks in advance to BH teams and drivers coders for trying to support this DVB-T model.
 

angelofsky1980

BlackHole Driver Specialist
How about this?
Code:
http://ubuntuforums.org/showthread.php?t=1971147&page=2

The post is useless. shows only brief instructions to do something but nothing about the direct support of tuner, demods and other hardware chips inside the Asus stick you have.

You can post here the output of this command with your device connected to your box (just to discover USB IDs and start study the possibiity or not to implement this with a lot of fortune):
Code:
cat /proc/bus/usb/devices
 

Odiseh

Vu+ Newbie
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=1779 Rev= 2.00
S: Manufacturer=Afa Technologies Inc.
S: Product=AF9035A USB Device
S: SerialNumber=CT7019015500844
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=01(Isoc) MxPS= 0 Ivl=125us
I: If#= 0 Alt= 1 #EPs= 5 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=01(Isoc) MxPS=3072 Ivl=125us
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=01 Driver=usbhid
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=64ms
 
Top