Unfortunately there is still issues with "Hauppauge pctv nanostick t2 290e usb-tuner"
I will try to give more feed back than this, when i have more time
Ultimo configuration:
Tuner A: Vuplus DVB-S NIM(AVL2108) (DVB-S2) - slot A
Tuner B: Vuplus DVB-S NIM(AVL2108) (DVB-S2) - slot B
Tuner C: Vuplus DVB-S NIM(AVL6222) (DVB-S2) - slot C
Tuner D: Vuplus DVB-S NIM(AVL6222) (DVB-S2) - slot C
Tuner E: PCTV 290e - USB port
Tuner F: PCTV 290e - USB port
Usb Tuners are located in separate USB ports on the back (usb power y cable is wired, between the two USB ports on the back)
UsbTuner v0.3.14-BETA1 (Build using DVBAPI 5.10)
Issue:
After a while (total random) the channel i am watching, is running into small loops. 3 seconds forward, looping back 2,5 seconds
(when recording this happens almost every time), and all other terrestrial channels are going Black. (The tuner is however, still present in tuner setup)
Fyi regarding output files:
cat /proc/bus/usb/devices >> /tmp/output.txt is no longer possible
/proc/bus/usb/devices do not exist in BH2.1.2
i did cat /proc/devices >> /tmp/output.txt instead
Best regards
I will try to give more feed back than this, when i have more time
Ultimo configuration:
Tuner A: Vuplus DVB-S NIM(AVL2108) (DVB-S2) - slot A
Tuner B: Vuplus DVB-S NIM(AVL2108) (DVB-S2) - slot B
Tuner C: Vuplus DVB-S NIM(AVL6222) (DVB-S2) - slot C
Tuner D: Vuplus DVB-S NIM(AVL6222) (DVB-S2) - slot C
Tuner E: PCTV 290e - USB port
Tuner F: PCTV 290e - USB port
Usb Tuners are located in separate USB ports on the back (usb power y cable is wired, between the two USB ports on the back)
UsbTuner v0.3.14-BETA1 (Build using DVBAPI 5.10)
Issue:
After a while (total random) the channel i am watching, is running into small loops. 3 seconds forward, looping back 2,5 seconds
(when recording this happens almost every time), and all other terrestrial channels are going Black. (The tuner is however, still present in tuner setup)
Fyi regarding output files:
cat /proc/bus/usb/devices >> /tmp/output.txt is no longer possible
/proc/bus/usb/devices do not exist in BH2.1.2
i did cat /proc/devices >> /tmp/output.txt instead
Best regards