Black Hole 1.7.9 Vu Uno Twin Tuner DVB-S2 settings problem

[ted74]

Hi everyone.
Recently I`ve bought Twin DVB-S2 for my Vu+ Uno STB with BH 1.7.9 image. When mounting twin tuner in STB setting on Panel Vu Uno jumb a new Tuner B /DVB-S2/. I try to set a few confugiration settings as: 1/set tuner A equal and looptrough to tuner B; Tuner B:Configuration mode-simple, advanced and second cable LNB combination.
What happen - PIP started in small window with lag, and the main window is black. In some combination Diseq didn't work.

My hardware is: - twin LNB /two cable/ and motorized dish with motor engine.Diseq 1.2.Second cabel from twin LNB connect to Loop out input of Vu Uno+.
Should I reinstall BH 1.7.9? My latest driver are beta 10.01.2013 for Vu and I excuted FPGA.
Any idea. I know that it`s a new upgrade for Vu Uno.
I`ve read a lot post refered to settings but..result is no good.
I would like to use PIP from different trnasponder adn record and watch diff. TV

 

[ted74]

Last report. Fot those who want to buy twin DVB-S2 tuner for Vu+ Uno.

I`ve done a new Black Hole 1.7.9 image installation. Did some test - nothing changed. I try to understand how is working Tuner B. Tuner A is OK.
What I,`ve done. Tuner A - not configured. Tuner B - advanced configuration. On the STB you can see the signal strenght, but the Screen on TV was black. Tested with free TV program.
When I recovered previous settings - Tuner A - advanced - everything is fine. Tuner B is not working correctly.

In my opinion in these case there is a two problem: 1/ bad hardware 2/ no fresh software for Twin DVB-S2 module.
But I can`t locate which is one from 1 or 2 is the right, because I`ll wait your personal experience.
For users who want to buy Twin DVB-S2 module for Vu+Uno - I think this is the right thread before buy it.
To Support Black Hole, please help us to locate the problem.

 

[ted74]

Problem was solved!

Make sure you have FPGA 4.5 installed. Download from http://archive.vuplus.com/download/fpga/vuuno/4.5/

Copy the two files to a USB Pen Drive. TS_PRO.dat TS_PRO.dat.md5. Go into the plugins menu and select FPGA Update. Select Cruze fit options and install.

Select TS_PRO.dat and Press OK. Wait for update to complete. After the update has completed, reboot receiver.

Setting up the tuner.

Insert LNB1 cable into Tuner 1 (a)
Insert LNB2 cable into Tuner 2 (b)

In the tuner configuration menu...

Set-up Tuner A for motorised.
Set Tuner B to "looptroughTuner A".

Test system with two TV free program on different transponders! If you have emulator - check your provider for multi login activation. If you don`t have multilogin access ...Tuner B will be unaccessible.

Regards

It`s worth to buy Twin DVB-S2 tuner for Vu Uno!

 

[angelofsky1980]

Test system with two TV free program on different transponders! If you have emulator - check your provider for multi login activation. If you don`t have multilogin access ...Tuner B will be unaccessible.

Next time I will ban you for life .... For now... only 1 week ban. Read Board Rules.