Black Hole 1.7.9 Vu Uno Twin Tuner DVB-S2 settings problem

T

ted74

Vu+ Newbie
Hi everyone.
Recently I`ve bought Twin DVB-S2 for my Vu+ Uno STB with BH 1.7.9 image. When mounting twin tuner in STB setting on Panel Vu Uno jumb a new Tuner B /DVB-S2/. I try to set a few confugiration settings as: 1/set tuner A equal and looptrough to tuner B; Tuner B:Configuration mode-simple, advanced and second cable LNB combination.
What happen - PIP started in small window with lag, and the main window is black. In some combination Diseq didn't work.

My hardware is: - twin LNB /two cable/ and motorized dish with motor engine.Diseq 1.2.Second cabel from twin LNB connect to Loop out input of Vu Uno+.
Should I reinstall BH 1.7.9? My latest driver are beta 10.01.2013 for Vu and I excuted FPGA.
Any idea. I know that it`s a new upgrade for Vu Uno.
I`ve read a lot post refered to settings but..result is no good.
I would like to use PIP from different trnasponder adn record and watch diff. TV
 
Last report. Fot those who want to buy twin DVB-S2 tuner for Vu+ Uno.

I`ve done a new Black Hole 1.7.9 image installation. Did some test - nothing changed. I try to understand how is working Tuner B. Tuner A is OK.
What I,`ve done. Tuner A - not configured. Tuner B - advanced configuration. On the STB you can see the signal strenght, but the Screen on TV was black. Tested with free TV program.
When I recovered previous settings - Tuner A - advanced - everything is fine. Tuner B is not working correctly.

In my opinion in these case there is a two problem: 1/ bad hardware 2/ no fresh software for Twin DVB-S2 module.
But I can`t locate which is one from 1 or 2 is the right, because I`ll wait your personal experience.
For users who want to buy Twin DVB-S2 module for Vu+Uno - I think this is the right thread before buy it.
To Support Black Hole, please help us to locate the problem.
 
Problem was solved!

Make sure you have FPGA 4.5 installed. Download from http://archive.vuplus.com/download/fpga/vuuno/4.5/

Copy the two files to a USB Pen Drive. TS_PRO.dat TS_PRO.dat.md5. Go into the plugins menu and select FPGA Update. Select Cruze fit options and install.

Select TS_PRO.dat and Press OK. Wait for update to complete. After the update has completed, reboot receiver.

Setting up the tuner.

Insert LNB1 cable into Tuner 1 (a)
Insert LNB2 cable into Tuner 2 (b)

In the tuner configuration menu...

Set-up Tuner A for motorised.
Set Tuner B to "looptroughTuner A".

Test system with two TV free program on different transponders! If you have emulator - check your provider for multi login activation. If you don`t have multilogin access ...Tuner B will be unaccessible.

Regards

It`s worth to buy Twin DVB-S2 tuner for Vu Uno!
 
ted74 said:
Test system with two TV free program on different transponders! If you have emulator - check your provider for multi login activation. If you don`t have multilogin access ...Tuner B will be unaccessible.
Click to expand...

Next time I will ban you for life .... For now... only 1 week ban. Read Board Rules.
 
You must log in or register to reply here.
Back
Top