This board is now closed. The Blackhole image ended in 2020. The board will remain available in Read Only Mode, so all the posts from the last 15+ years are not lost. We thank you for being part of the community for the last 15+ years. You can join the OpenBh board if you have not already done so at www.openbh.net.

Black Hole 3.0.9.F Vu+ Zero & Vu+ Zero Rev.2.0

cachopin said:
Hello, I have installed this new version 3.0.9 F and it seems that when you install a list of channels that in version 3.0.5 do not like anything and do not detect or raise the target, on another occasion when uploading it with dreamst it is restarting in loop. I have to say that in this it seems that he only likes version 3.0.9 other versions do not start. Has it ever happened to you?
Click to expand...

The zero rev. 2 is not compatible with older bh versions because of chipset change.
 
jiorjio81 said:
Anyone know how to tell me the username and password of this image for telnet?
Click to expand...

for DCC-2E tool , I use

user : root
password : dreambox

from the browser //http:root@BM750/

Will take to the openWebif

 
Last edited:
It's important to say that every images downloaded from this website has got no password: if any tools need a password it's their responsibility and their choice.
If you downloaded a backup or an installer from an unofficial BH/OBH website, it's another story....
 
This is a clean install, nothing else is installed.
epgimport.xz is downloaded to /tmp but nothing else happens.
Have tested OpenBH and where everything worked very well, this one has a much newer version of epg import.
 

Attachments

You are missing the conf file /etc/enigma2/epgimport.conf
You need to open EPG settings in Blackhole and setup your EPG Import where the epg.dat file is stored
Save your settings and restart enigma2 and all should work just fine.
But with Blackhole i strongley recommend the use of CrossEPG :)
 
Cannot use crossepg for iptv epg along with custom.channels.xml
Stored for only Norwegian epg source and gets the file:
epgimport.conf in /etc/enigma2/
Manual download doesn't work any better now.
On my Zero4K this is plug and play.
This is not the case at regular zero.
 
You are correct that CrossEPG does not work as easy as EPG Import when it comes to custom sources
But how do you add your custom source to EPG Import??
 
Regarding iptv epg, how this is set up is not the problem.
The file is created together with m3u downloaded with script to /etc/epgimport/ own source is also added rytec.sources.xml
After all, epg import should work even without my files but does not.
 
So lets start form the beginning ;)

Does your EPG importer crash for all sources?
If you de select your custom source it still crash?

Or cant you even open the source page with blue button?
 
Ev0 said:
Black Hole 3.0.9.F​

What is new ?

​
  • Add support for Vu+ Zero Rev.2.0
***** This image is needed if you have the new Vu+ Zero Rev.2.0, you can not use an older BH image with the new Vu+ Zero Rev.2.0 *****​
​
1-png.44697


2-jpg.44718


4-jpg.44700


5-jpg.44701


6-jpg.44690


8-jpg.44692


9-jpg.44693


10-jpg.44694


11-jpg.44695


12-jpg.44696


This Image has the latest drivers but CAN be installed in OpenMultiboot. The image does not need to be installed in flash.

This latest version of the Black Hole series has been updated and improved for maximum stability and performance.

Please note that of all images Black Hole now has the best epg system:

- Integrated OpenEpg

- CrossEPG supported

- EPG Import supported


Main functions of the buttons on the remote

OK button = Skin with simple information

OK button x 2 = Extra Info Skin

Blue button = Black Hole Blue Panel

Blue button and then Red button = Black Hole Epg Panel

Blue button and then Yellow button = System Monitor Panel

Blue button long press = Extensions

Yellow button = Audio menu

Green button = Black Hole Green Panel

Green button long press = Subservices

Green button and then Red button = Fast Plugin Setup

Green button x 2 = Fast Plugin

Button Red short press= access HbbTv functions

Button Red long press= Red Panel (Parallel Universes Teleportation)

Addons

Green button and then Yellow button takes you to:-

Dedicated server for BlackHole addons

Download and install additional packages from the Black Hole server

Infobar / OSD

Analog Clock Gui

Channel orbital location

Advanced Tuner Info: Sr Freq Pol Fec

Signal SNR, BER

Infobar picons

Characteristics of BlackHole Panels

Blue Panel

Extra Settings

Black Hole Speed Up

Black Hole Cron Manager (Manage schedules)

OSD Settings (OSD configuration)

Devices Manager

Usb Format Wizard

Kernel Modules Manager(Kernel module operator)

Inadyn Settings (Configure Inadyn)

Swap File Settings (Configure File Swap)

Hard Disk Settings (Configure Hard Drive)

OpenVPN Panel ( OpenVPN Panel)

Samba / CIFS Panel ( Samba Panel)

NFS Server Panel ( NFS server Panel)

Telnet Panel ( Telnet Panel)

FTP Panel ( FTP Panel)

UPnP Client Djmount

UpnP Server Minidlna

Pcsc Panel

Tuner Server

Network Browse & Mountpoints

Info Panel

1 - Gui Setting (Gui configurations)

2 - Service Information (information system)

3 - About (info)

Memory (Memory)

Space (capacity)

CPU (processor)

Process (process)

EPG Panel

Global settings (global settings EPG)

Setting Provider (ISP settings)

Green Panel

Fast Plugin Setup (Configure quick access to your favourite plugin)

Fast Plugin (Access your favourite plugin)

Addons (added)

Addons Download Manager (Manager for package downloading)

Online Feeds Settings update

Online Black Hole image update

Manual Install BH packges (Manual installation of Black Hole packages)

Manual Install IPK packages (Manual installation of IPK packages)

Addons Uninstall Panel (Uninstalled packages)

Black Hole Statistics (See connections, top downloads and more)

Characteristics of BlackHole Panels

Red Panel

BH Parallel Universe Teleportation

BlackHole

Avalon

Chaos

Ghost

ServiceApp and Exteplayer3 are both external plugins, and are not part of the BH image, therefore any users that do not want / need to use these plugins, can remove them via the BH SpeedUp panel.

Credits:

Thanks to MX3L for ServiceApp https://github.com/mx3L/serviceapp/tree/develop

Thanks to SamSamSam for Exteplayer3 https://github.com/e2iplayer/exteplayer3

Thanks to dpeddi for patching ServiceApp and Exteplayer3 to work on BH.

Thanks to Pedro_Newbie for Backup script.

Thanks to the group of Beta Testers.

Thanks to Rytec for providing us with the server with all epg.dat files.

Thanks to MaxZ4 for Integrated EPG loader.

Thanks to Skaman for Cross EPG

Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.

Thanks to Reinh@rd for the file satellites.xml.

Thanks to Littlesat and Pli Team for the original autolanguage and subtitle options code

DISCLAIMER

THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

LICENSE (TERM OF USE)

THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.

This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.​
Click to expand...
thanks a lot!
 
i have a question. i have vu zero and the lastest version blackhole. can i see vu zero with zerotier? and if i install zerotier its posible see out red?
 
You must log in or register to reply here.
Back
Top