Duo2 dead

A

Ad87

Vu+ Newbie
Hi folks,

I've had a duo2 running blackhole for about a year. I decided to install the latest version, downloaded, extracted and copied the folder to a usb stick formatted to fat32. I plugged it in and it went through a few things but then froze on 'checking usb' I powered it off at the back and started again but it just sticks on 'checking usb' it's been on that now for a few hours. I've even tried installing the bootloader again and then going back to it but to no effect. It's the same regardless of what image I tried to install, I've tried blackhole and vix. Please can someone help, I'm lost :'(
 
Try a different USB stick.
Also try disconnecting your co-ax cable, and anything else attached, including any USB devices, and internal hard drive, if you have one.
Do you know exactly how far it got, through the loading process, before freezing?
 
Hi guys, sorry for the late reply, I've been away with work :( I've just tried a new usb stick, I formatted it to fat32 with the hp tool. Copied the vu plus folder over, plugged it into the front, powered on and pressed the button when the update message was shown. It now says: finished, remove usb, delete cfe and reboot.. what does it mean by delete cfe? I've tried removing the usb and rebooting but it just loads the blackhole screen saver image that it was stuck on before?

Thanks again.

Adam.
 
You must log in or register to reply here.
Back
Top