Flashing circle...

R

Ruudi

Vu+ Newbie
After istallation the lcd4config file STB is carring out some actions quite regularly (every 5-15 min) about what the circle in the left-upper screen corner flashes 2-5 sec (image BH 2.1.7). At this flashing time all other STB operations are not possible. This flashing disturbs a bit. How to get rid of this?
 
I have to remind my question again (see above) as no answer yet. Only Admin asked to edit lcd4linux. What I have to edit there?
 
The flashing circle indicates that the receiver is busy, usually it occurs when trying to access the hard drive.
I suggest you remove the LCD4Linux and see if that solves the problem, it might be a coincidence that this problem started after loading that software, and the problem might lie elsewhere.
 
Yes, the LCD4Linux removing solved the problem. But a bit sad to see dark and almost emty LCD now...
 
Being more detail, I removed the lcd4config file that was proposed by nunigaia. LCD4Linux itself as a part of the image stays on place as before, quite poor now.
 
You must log in or register to reply here.
Back
Top