Flashing from backup not working

[f1ngers]

Hi,

I'm using Blackhole 3.0.1F on a vu+solosev2.

When flashing an image from a "Full Backup" of 3.0.1F, on reboot the box displays only the Blackhole screen and gets stuck.

Any solutions? The file names in the backup match the oringnal blackhole image filenames.

 

[f1ngers]

Problem resovled:

1: The original file "kernel_cfe_auto.bin" included in blackhole 3.0.1 download is 4041kb

2: The file "kernel_cfe_auto.bin" when backed up is 458kb

Replace the backed up file with the original file and load the image.

 

[Lazarus Long]

Thanks, I will try!

 

[nunigaia]

Thanks, I will try!

you need too the file " reboot.update "

 

[Lazarus Long]

So the backup doesn't work well, right?

 

[Lazarus Long]

you need too the file " reboot.update "

The reboot.update file is zero byte, both in original firmware and in the backup.

 

[Lazarus Long]

Ok, I've replace the backed up file kernel_cfe_auto.bin with the original one and it worked also in multi boot.
Thanks!!!

 

[nunigaia]

So the backup doesn't work well, right?

I never had problems with backup.

 

[Lazarus Long]

I never had problems with backup.

Yes, I've read it in another thread. So, what could be the problem?
I'm using the "Backup Menu" in the BH Main Menu.

 

[nunigaia]

Yes, I've read it in another thread. So, what could be the problem?
I'm using the "Backup Menu" in the BH Main Menu.

by using telnet enter one by one this commands:

opkg update

opkg upgrade

reboot

Retry it.

best regards
nunigaia