Lets go step by step in making your own BH backup image:-
1-Dload the latest UBS BH image!
2-Extract the USB BH image directly into a clean/formatted USB!
3-Turn off your STB (press power button in the back of STB)
4- Remove any USB from the back of STB and internet wire!
5- Now we have BH image on USB,as per step 2, insert USB in the front slut!
6-Turn the Vu STB on from the power button!
7-wait till U see @Vu+ small screen,,,REMOVE USB And REBOOT the Vu+, now power off the Vu , insert internet wire!
8- Turn on power of Vu+,, fallow the secreen instructions!
9- now your BH image is ready!
10- set your HDD (hard disk) and go to step 11.
11-GO to menu > setup> system > customize > change set up mode (< >) into expert! ,,,OK...exit!
12-GO to menu > setup> system > service searching > tuner configurations ,,,,set up the mode,,it depends on number of SAT U have,,,etc!
13-GO to menu > setup> system > service searching > Automatic Scan,,,,2Dload Channels,,,or some times its easy to just use READY setting available @ BH image server!
14-Install ,what ever plug in U desire, from Image server!
Now I assume the BH image @the STB is ready for Backup,,,so we continue!
14-Press green> blue (script) > BackUpIMG_HDD or USB,,,press ok, wait to complete , now your back up is done and avilable @ HDD,,and by using DCC utility U can find that the BKup is stored @HDD!
Lets say that a new BH image is avilable and U like to up date,,,we do the following:-
16-Go to menu > BH Personal Back up,,BackUP (red),,press ok,,,wait,,,after finish,,,exit,,now BH P. Back up is been stored @HDD!
17-we apply step #1 to step # 9!
18- Now U only have to restore BH P. Back up (it will have all plug in, setting,,etc,,BUT NO old skins)!
19-Go to menu > BH Personal Back up,,,,Restore (green),,,wait,,,exit!
Now U have the new BH image plus all your setting , plug ins,,,etc!
Enjoy BH Image,,,the best ever!
a911
BH Lover..

!