Looking advice to configurate LNB & switchs

[tiger2000]

Helllo everyone
I am looking advice to configurate my VU+SOLO HD SE . (using black hole 2.1.5 image ). I am new on enigma2 receiver. I have used only "Closed source" receivers like openboxs & amikos
I have switch 4x4 & switch disecq 4x1..into my installation.. No motorized antennas
There are Four examples of my configuration.
Satellite = 40.5 Ses 6 Cband
LNB Type = Standard (5150)
TP index = 4162H/6510
Disecq 1.0= 1 / 4
Disecq 1.0= Disable
Positioner= OFF
22 KHZ= ON
0 / 12 V= OFF
Polarity= Auto
LNB Power = ON

Satellite = 58.0 W Intelsat 21 CBand
LNB Type = Standard (5150)
TP index = 3152 H/3560
Disecq 1.0= 1 / 4
Disecq 1.0= Disable
Positioner= OFF
22 KHZ= OFF
0 / 12 V= OFF
Polarity= Auto
LNB Power = ON

Satellite = 97.0W KU (Galaxy)
LNB Type = Standard (10750)
TP index = 11800 H/30000
Disecq 1.0= 2 / 4
Disecq 1.0= Disable
Positioner= OFF
22 KHZ= ON
0 / 12 V= OFF
Polarity= Auto
LNB Power = ON

Satellite = 30.0 W KU Hispasat
LNB Type = Standard (10750)
TP index = 11800 H/30000
Disecq 1.0= 2 / 4
Disecq 1.0= Disable
Positioner= OFF
22 KHZ= OFF
0 / 12 V= OFF
Polarity= Auto
LNB Power = ON

I am looking how "transfer it" into VU+ SOLO HD SE Receiver:????

Configuration Mode: Advanced
Satellite: 30.0W ku Hispasat
LNB: LNB1............32
Priority: Auto, 0, 1.........9064
Lof: Userdefined, Unicable, Cband, Universal
Lo F/L 09750
Lo F /H 10600
Thresold 11750
Voltaje Mode: polarisation, 13V,18V
Increased Voltaje: No/yes
Tone Mode: Band, On, OFF
Disecq mode: 1.0, 1.1, 1.2, none
Toneburst: None, A,B
Committed disecq command: None, AA, AB,BA,BB, Input 1.......16
Fast disecq: No/yes
sequence repeat: No/yes
Command order: commited tune burst, tone burst commited

Thanks in advance