Sturlus stugi
Vu+ Newbie
ok, I will... thank you so much for helping! 
Mounting HDD in MeoBoot
- Thread starter Sturlus stugi
- Start date
Sturlus stugi
Vu+ Newbie
Code:
top - 23:53:40 up 46 min, 1 user, load average: 1.04, 1.04, 0.97
Tasks: 78 total, 2 running, 76 sleeping, 0 stopped, 0 zombie
Cpu(s): 46.0%us, 53.7%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 106364k total, 102972k used, 3392k free, 4336k buffers
Swap: 0k total, 0k used, 0k free, 42856k cached
Past2Present
Vip
But don`t be fooled with Blackhole on meoboot 
This is correct and coresponding with the fstab file
And this is what you get if you look at the mountpoints, the upper and bottom mounts can not be changed
This is correct and coresponding with the fstab file
And this is what you get if you look at the mountpoints, the upper and bottom mounts can not be changed
Sturlus stugi
Vu+ Newbie
was unable to mark them... they where constantly updating.. screenshot?
Sturlus stugi
Vu+ Newbie
Sturlus stugi
Vu+ Newbie
.
appropriate your inputBut don`t be fooled with Blackhole on meoboot
This is correct and coresponding with the fstab file
View attachment 10704
View attachment 10705
And this is what you get if you look at the mountpoints, the upper and bottom mounts can not be changed
but
that's another subject what I'm working on
don't take it wrong
Sturlus stugi
Vu+ Newbie
But don`t be fooled with Blackhole on meoboot
This is correct and coresponding with the fstab file
View attachment 10704
View attachment 10705
And this is what you get if you look at the mountpoints, the upper and bottom mounts can not be changed
Are you running meoboot on a USB with a 100MB Fat32 partition??
is that your 90MB /personal mount?
Past2Present
Vip
Yes that one is for preventing that it will hang/stuck on starting.
Sturlus stugi
Vu+ Newbie
God Morning, it is done!
I installed vu+ solo official image, formated, initialised and mounted HDD.
Re-flashed BH 2.0.1
Mounted HDD as /media/HDD
Mounted USB as /media/USB
Mounted USB (100MB.Fat32) /media/personal (as past2present has done)
Performed online update.
And here is my fstab content now (before installation of MeoBoot):
Now i am going to install MeoBoot...
.....
There.. its done.. fast click through setup... now lets check device manager... hmm..
USB 100MB Fat32 parition: NOT MAPPED
HDD: NOT MAPPED
USB 30GB (Meobootinstallation) /media/usb
Lets go into mountpoints and see if can mount them...
USB (100MB Fat32) locked on /media/meoboot
HDD locked on /media/meoboot
USB 30GB (meobootinstallation) /media/usb (but i can choose all the different mountpoints)
hmmmm....
And here is fstab from /media/usb/MbootM/BH-2.0.1-vusolo/etc:
But what is this..? there is also this folder on /etc/media
/media/meoboot/MbootM/BH-2.0.1-vusolo/etc
Here is the fstab from there:
Telnet top command output is attached.
I installed vu+ solo official image, formated, initialised and mounted HDD.
Re-flashed BH 2.0.1
Mounted HDD as /media/HDD
Mounted USB as /media/USB
Mounted USB (100MB.Fat32) /media/personal (as past2present has done)
Performed online update.
And here is my fstab content now (before installation of MeoBoot):
Code:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbfs defaults 0 0
/dev/mtdblock2 /boot jffs2 rw 0 0
tmpfs /var/volatile tmpfs mode=0755 0 0
tmpfs /dev/shm tmpfs mode=0777 0 0
/dev/disk/by-uuid/11F2-3466 /media/personal auto defaults 0 0
/dev/disk/by-uuid/8c98a0a9-f482-4fd1-a0e2-11508438cca8 /media/hdd auto defaults 0 0
/dev/disk/by-uuid/a86754c0-d0d8-87d6-c788-f7476ceb1553 /media/usb auto defaults 0 0Now i am going to install MeoBoot...
.....
There.. its done.. fast click through setup... now lets check device manager... hmm..
USB 100MB Fat32 parition: NOT MAPPED
HDD: NOT MAPPED
USB 30GB (Meobootinstallation) /media/usb
Lets go into mountpoints and see if can mount them...
USB (100MB Fat32) locked on /media/meoboot
HDD locked on /media/meoboot
USB 30GB (meobootinstallation) /media/usb (but i can choose all the different mountpoints)
hmmmm....
And here is fstab from /media/usb/MbootM/BH-2.0.1-vusolo/etc:
Code:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbfs defaults 0 0
#/dev/mtdblock2 /boot jffs2 rw 0 0
tmpfs /var/volatile tmpfs mode=0755 0 0
tmpfs /dev/shm tmpfs mode=0777 0 0
/dev/sda1 /media/hdd auto defaults 0 0But what is this..? there is also this folder on /etc/media
/media/meoboot/MbootM/BH-2.0.1-vusolo/etc
Here is the fstab from there:
Code:
rootfs / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
usbdevfs /proc/bus/usb usbfs defaults 0 0
#/dev/mtdblock2 /boot jffs2 rw 0 0
tmpfs /var/volatile tmpfs mode=0755 0 0
tmpfs /dev/shm tmpfs mode=0777 0 0
/dev/sda1 /media/hdd auto defaults 0 0Telnet top command output is attached.
Attachments
Past2Present
Vip
Well your hdd is mounted, but do you`ve a folder called media on /etc?